Description
Reviews
CR 1-12 A-FGJ-A-E-HQQE
Vertical multistage centrifugal pump with suction and discharge nozzles located on the same level ("in-line"), which provides the possibility of installation in a horizontal single-pipe system. The pump head and base are made of cast iron - all other parts in contact with the pumped liquid are made of stainless steel. The cartridge shaft seal provides high reliability, safe use and easy access for maintenance. The rotation is transmitted through a detachable coupling. The connection of the pipeline is carried out using combined flanges of DIN-ANSI-JIS standards.
The pump is equipped with an asynchronous 3-phase electric motor on the paws, with air cooling.
| Liquid: | ||
| Working fluid: | Water | |
| Liquid temperature range: | -20 .. 120 °C | |
| Temperature of the pumped liquid: | 20 °C | |
| Density: | 998.2 kg/m3 | |
| Technical data: | ||
| The pump speed at which its characteristics are calculated: | 2864 rpm | |
| Nominal flow rate: | 1.8 m3/h | |
| Nominal pressure: | 57.1 m | |
| The location of the pump during installation: | VERTICAL. | |
| Type of seal installation: | Single | |
| The code of the mechanical seal of the shaft: | HQQE | |
| Certificates on the nameplate: | CE, EAC,ACS | |
| Working tolerances: | ISO9906:2012 3B | |
| Materials: | ||
| Footing: | Cast iron | |
| IN 1561 EN-GJL-200 | ||
| ASTM A48-25B | ||
| The impeller: | Stainless steel | |
| Impeller, EN/DIN: | EN 1.4301 | |
| Impeller, AISI/ASTM: | AISI 304 | |
| Bearing: | SIC | |
| Mounting: | ||
| Maximum ambient temperature: | 60 °C | |
| Max. working pressure: | 25 bar | |
| Max. pressure at a given temperature: | 25 bar /120 °C | |
| 25 bar /-20 °C |
| Pipe connection: | DIN /ANSI /JIS | |
| The size of the suction pipe: | DN 25/32 | |
| Pressure pipe size: | DN 25/32 | |
| Permissible pressure: | PN 25 | |
| The size of the inlet flange: | 250 lb | |
| The size of the flange of the electric motor: | FT100 | |
| Electrical equipment data: | ||
| Electric motor standard: | IEC | |
| Type of electric motor: | 80A | |
| Energy efficiency class: | IE3 | |
| Rated power - P2: | 0.75 kW | |
| Energy (P2) required for the pump: | 0.75 kW | |
| The frequency of the supply network: | 50 Hz | |
| Rated voltage: | 3 x 220-240D/380-415Y V | |
| Rated current: | 3.30/1.90 A | |
| Inrush current: | 580-620 % | |
| Cos phi - power characteristic: | 0.81-0.71 | |
| Rated speed: | 2840-2870 rpm | |
| Energy efficiency: | IE3 80,7% | |
| Efficiency of the electric motor at full load: | 80.7 % | |
| Engine efficiency at 3/4 load: | 82.7 % | |
| The efficiency of the electric motor at 1/2 load: | 81.7 % | |
| Number of poles: | 2 | |
| Degree of protection (IEC 34-5): | 55 Dust/Jetting | |
| Insulation class (IEC 85): | F | |
| Number of the electric motor: | 85U05104 | |
| The management system: | ||
| Frequency converter: | Missing. | |
| Other: | ||
| Minimum efficiency index, MEI ≥: | 0.70 | |
| Weight(Net): | 29.2 kg | |
| Weight(Gross): | 32 kg | |
| Scope of delivery: | 0.074 m3 | |
No reviews yet — yours could be the first.
All reviews 0
Список отзывов пуст