Monoblock pump in sanitary design Euro-HYGIA® I BVY 40/40/3/2
Euro-HYGIA® series single-stage single-suction centrifugal pumps made of stainless steel are designed for use in the food industry, where hygienic design is the most important requirement.
They are made of high-quality materials in accordance with the strictest international hygiene standards, for example, EHEDG, QHD and GOST.
Euro-HYGIA® pumps can be adapted to perform any task that requires reliable and hygienic pumping. They have CIP/SIP functions and comply with GMP requirements for FDA approved materials.
The main purpose is to be used in the food industry, the soft drink industry and the pharmaceutical industry. Due to their flexibility, Euro-HYGIA® pumps can also be successfully used in all other industrial and technological operations, including water treatment, chemical treatment, surface treatment and technological processes in the textile industry.
Appointment
- Pumping liquids in breweries and dairies;
- Mixing and production of soft drinks; Food industry enterprises;
- Clean Water Supply Systems (WFI); Technological pumping in the pharmaceutical industry;
- The system of non-selective washing of equipment (CIP);
- Technological pumping at chemical industry enterprises;
- A pump for pumping and circulating liquids in water treatment and tissue treatment systems.
Features and benefits
- Hygienic design
- Easy maintenance – less downtime;
- Possibility of CIP washing and SIP sterilization (DIN EN 12462 standard);
- Special design;
- Materials: Rolled steel of deep drawing AISI 316L (1.4404/1.4435) with electropolished surface;
- Gentle pumping of liquids requiring careful handling, such as fruit juice;
- Optimized hydraulics;
- Energy-efficient electric motors;
- Sequential sealing systems;
- A wide range of pump designs;
- Pumps in a protective casing;
- Different types and sizes of pipe connections;
- Three different types of impeller;
- A trolley-mounted version is available.
Technical specifications
- Flow rate: up to 130 m3/h (up to 250 m3/h on request)
- Head: up to 70 m
- Temperature of the pumped liquid: up to +95°C (up to +150°C on request)
- Maximum working pressure: 25 bar
Description:
- Hygienic application.
- The pump is made of stainless steel AISI 316L (DIN EN 1.4404/1.4435)
- The electric motor is covered with a stainless steel casing.
- Ease of installation and maintenance
Areas of application:
- Production of beer and dairy products
- Production of alcoholic and non-alcoholic products
- Food production
- Pharmaceutical products (including water for injection - WFI)
- Perfumery industry Cleaning systems
Options:
- Double shaft end seals ("tandem" and "back-to-back") Explosion-proof design Complete set with a frequency converter Installation of the pump on a stainless steel trolley Various designs of impellers