Fimet three-phase electric motors series MPR They are characterized by increased slip in operation, they are used to perform production operations with high inertial loads, in repeated short-term operation mode (S2, S3, S4, S6), constant alternation of start and braking. Examples of use: drive hammer, presses, conveyors and similar devices.
The body structure is closed, a high degree of protection against dust and moisture (splashes, jets) entering inside, radial fans of an outrigger design are used to cool the system. Being a derivative of the EM series, they differ from their progenitor in larger dimensions, enhanced mechanics and are equipped with a special rotary separator due to the specifics of their application.
Technical characteristics of three-phase asynchronous motors Fimet MPR series:
- Rated power: 7.5 - 110 kW;
- Rated torque: 96 - 955 Nm;
- Operating speed range: 750 /1000 /1500 rpm;
- Operating voltage range: up to 400 V;
- Overall height: 180 - 315 mm;
- Mounting design: on request;
- The degree of protection of the case: IP 55;
- Degree of protection: IC 411, IC 416 (other options on request);
- Insulation class: F.
Overall standard sizes of asynchronous electric motors Fimet EMA
MPR 180M4, MPR 180L4, MPR 200L4, MPR 225M4, MPR 250M4, MPR 280SR4, MPR 280S4, MPR 315S4, MPR 315MA4, MPR 315MB4
1000 rpm version (6-pole) :
MPR 180M4, MPR 180L4, MPR 200L4, MPR 225M4, MPR 250M4, MPR 280SR4, MPR 280S4, MPR 315S4, MPR 315MA4, MPR 315MB4
750 rpm version (8-pole):
MPR 180M8, MPR 180L8, MPR 200L8, MPR 225M8, MPR 250M8, MPR 280S8, MPR 315SR8, MPR 315S8, MPR 315MA8, MPR 315MB8
