Cylindrical gearboxes with parallel shafts rulers F Stober Antriebstechnik has a practical short mounting system with a plug coupling of two types of structural design MGS (MR - round flange) for operation with standard asynchronous motors and SMS (MQ - square flange) for servo motors, according to IEC and NEMA-C regulations.
Compact dimensions, durable and hermetic architecture with a high degree of protection against dust and moisture ingress into the mechanisms of the transmission unit. At the output, a solid shaft with a key or a smooth, hollow shaft with a keyway or a shrink disk, the housing can have various variations in the design of supports, fasteners and their combinations, any mounting positions are available. The work is characterized by high efficiency and low noise. High-quality lubricants are included in the package, for small sizes no oil change is required during the entire service life, for large ones with a frequency of 10,000 hours.
Technical characteristics of Stober Antriebstechnik F series cylindrical gearboxes with parallel shafts
- Gear ratio: 4,3 - 547;
- Nominal torque: 44 - 1100 Nm;
- Number of steps: 2, 3;
- The degree of protection of the case: IP65;
- Operating temperature range: 0 ... + 40 °C.
Standard sizes of Stober Antriebstechnik series F servo reducers
Type of gearbox | Gear ratio | Nom. moment, Nm |
F102 | 4,3 - 140 | 44 - 120 |
F202 | 4,7 - 141 | 48 - 240 |
F203 | 184 - 552 | 240 |
F302 | 4,6 - 141 | 138 - 400 |
F303 | 182 - 551 | 400 |
F402 | 4,7 - 140 | 170 - 700 |
F403 | 182 - 547 | 700 |
F602 | 4,5 - 140 | 309 - 1100 |
F603 | 181 - 540 | 1100 |
Buy Stober Antriebstechnik F series cylindrical gearboxes with parallel shafts (SMS/MGS), you can find out the price and more information about the product by contacting our specialists.
