DT46 Thermodynamic condensate trap with PN40 carbon steel filter Tmax=+400oC
The DT46 thermodynamic condensate trap is mainly used in medium and high pressure systems, including for tracing steam pipelines. It has low weight and dimensions, is easy to install. The heat-insulating cover ensures stable operation and makes the condensate trap resistant to the effects of harsh environmental conditions that may affect its normal operation. The only movable part is the disk.
It does not require configuration across the entire workload range. Connection – internal thread or flanges
BASIC PROPERTIES
- Thermal insulation cover.
- It is allowed to use on superheated steam.
- The seat and disc are replaced without dismantling the condensate drain.
- It is not susceptible to water shocks and vibrations.
- Easy-to-maintain built-in filter.
OPTIONS: drain valve.
WORKING ENVIRONMENT: Saturated and superheated steam.
VERSIONS: DT 46
STANDARD SIZES: From DN
1/2" to DN 1" – from DN15 to DN25
CONNECTION: Internal thread ISO7/1 Rp (BS21)
Flanges according to EN1092–1 PN40-PN100 or ANSI
installation: Preferably on a horizontal pipeline. Installation in any position is allowed.
technical specifications:
Max. working pressure-46 bar
Max. Operating temperature – 400 °C
LIMIT PARAMETERS: Min. working pressure – 1.5 bar
