Электродвигатель асинхронный 2P LSES 132M 9kW IFT/IE2 B3 380D/400D/415D/690Y-460D 50-60Hz-1probe PTO (winding)

In the conditions of economic realities, the key to the success and further development of the company should be the proper use of resources, technologies and energy carriers.

In the market of production of energy-efficient electric drives and electric generating machines, our partner is the company Leroy-Somer is a trend-setting company. Since 2009, Leroy Somer has been producing all AC electric motors in accordance with IEC 60034, 60038, 60072 and efficiency class IE2, IE3 (IEC 60034, 60038, 60072 2008 standards define the energy efficiency classes of low-voltage AC electric motors with a capacity from 0.75 to 375kW).

Modification of the electromagnetic system of electric motors of the LS, FLS, PLS series allowed the manufacturer to increase the efficiency of the electric machine by an average of 1.5-3%, new series of asynchronous electric motors are available under the name LSES, FLSES, PLSES, LSMV, FLSMV.

Asynchronous electric motors PLSES made in a splash-proof housing with a degree of protection IP23 are made in the housing of electric motors PLS, have identical overall and connecting dimensions.

Advantages of using PSES IE2 electric motors

• Low power consumption compared to Class IE1 electric motors; 
• Additional increase in efficiency when operating from a frequency converter; 
• High efficiency in variable load modes; 
• Long service life of the equipment; 
• Low level of heating and heat loss; 
• Low noise level.

Parameters of asynchronous electric motors Leroy Somer series PLSES IE2

• Rated power: 30 - 900 kW; 
• Maximum speed: up to 8000 rpm; 
• Overall height: 180 - 400 mm; 
• Degree of protection: IP23; 
• Cooling method: IC411, IC416A; 
• Insulation class: F, H; 
• Installable options: feedback sensors (encoders, resolvers), forced cooling fan, temperature sensors (PTO, PTC, PT100, KTY84), vibration measurement sensors, bearings with refillable lubrication, reinforced bearings, manufacture of a special shaft, adaptation of the height of the shaft axis of the electric motor using adapter frames, etc.

To increase the efficiency of the electric drive in variable load modes, we recommend using PLSES electric motors in conjunction with Leroy Somer frequency converters, Control Techniques Unidrive SP /Unidirve SPM series, Powerdrive MD2 /FX, Unidirve M.

Regarding the selection of Leroy Somer electric motors with an increased energy efficiency class of the PLSES IE2 series, please contact us by phone saluteh.

Parameters of electric motors Leroy Somer PLSES IE2 (3000 rpm,IP23,50Hz, Class F, ΔT 80K, 400V Δ)

Parameters of electric motors Leroy Somer PLSES IE2 (1500 rpm,IP23,50Hz, Class F, ΔT 80K, 400V Δ)