DELPHI 132MA-6 B3 kW4 230/400 electric motor+ESPMCBDX+move of t-box on right
IE2 or IE3 standard, IP55, multi-frequency 50/60 Hz, multiple voltages 220\380; 230\400; 260\415; 400\690; 380\660; 415\720 B, aluminum housing, S1. (IE4 on request)
Configurations: V3; B5; B14; B5R; V3\B14; V3\B5; B3\B5R
Automotive electric motors are built in accordance with international standards. Each size in the design forms is calculated with reference to the tables of the IEC 72-1 standard.
All motors have many voltages and frequencies of 50/60 Hz, insulation class F, (H on request), S1 continuous operation, protection IP55 (IP56, 66, and 67 on request). Tropical winding, efficiency class IE2 or IE3 are provided for operation with frequency converters.
Options and special designs:
- - cable entry position (standard on the right), front, left, rear
- Special protection from the external environment:
- - Tarred terminal box or winding or both
- - Anti-corrosion coating of the stator and laminated rotor
- - Anti-rust coating of the shaft and rotor
- - C5M paint
- - Moisture-resistant paint
- - Paint for aggressive environments
- - Winding for operation in tropical conditions (standard)
- - Anti-corrosion additional lubrication around the bearings
- - Heating devices
- - Rain shield or casing for the textile industry
- - Special RAL colors, etc
Electrical protection:
- - Forced cooling system
- - Bimetallic thermal sensor RTO or thermistor RTS (standard depends on the size)
- - RT100 temperature sensor for bearings
- - RT100 temperature sensor for winding
- - Reinforced winding for working with a frequency converter (standard), etc.
Mechanical protections and adaptations:
- - Roller bearings on DE (if not standard)
- - Vibration sensors
- - Manshy shaft, Elongated shaft, double shaft
- - Pinches on the drive side with axial mechanical protection
- - Lubrication nipples
- - Without a fan
- - Metal fan cover instead of plastic, etc.
Encoders:
- - Incremental encoders
- - Absolute encoders, profinet, profibus, etc