ABB DMP DC Electric Motor

DC motors of the DMP series were manufactured by ABB until 2007. DMP electric motors are considered one of ABB's most successful DC solutions. The key to success can be explained by the following factors: the flexible production program of DMP electric motors allowed ABB to create a functionally complete solution for OEMs (manufacturers of technological equipment), the use of advanced technologies in design (specially designed brush collector assembly) and the use of the best insulating, conductive materials allowed to minimize operating costs and increase reliability, collaboration with ABB DCS400, DCS500 series digital thyristor electric drives achieve high accuracy in dynamic modes (metalworking machines, test benches).

Currently, ABB DMP series DC electric motors operate on extruders, extrusion lines, mixers, test benches, lifts, funiculars, lifts, calenders, presses, printing, papermaking, molding machines, rubber mixers, granulators, metalworking and woodworking machines, conveyors, cutters.    Considering that the DC motors of the ABB DMP series have been discontinued, our company is ready to manufacture DC motors that will be completely identical to previously installed electric motors (full compliance with overall dimensions and electrical parameters). 

In case of inexpediency in case of failure of both the electric motor and the DC drive, our company's engineers are ready to make the transition to an asynchronous electric drive with frequency control. Since the DMP electric motors were discontinued, our specialists have carried out repair work on equipment manufactured by Krauss Maffei, Battenfeld, Cincinnati Extrusion, Maillefer, Demag, Reifenhauser, Kiefel Extrusion, Technoplast, Technoplastic, DMT Machinery, Andritz, Toshiba, Theysohn Extrusion, Berstorff, Kuhne, Rosendahl, Thyssen, Krupp, Coperion.

Parameters of DC motors of ABB DMP series

• Rated power: up to 200 kW;
• Nominal torque: up to 970 Nm;
• Overall height: 112 -180 mm;
• Degree of protection: IP23, IP44, IP54, IP55;
• Cooling method: IC01, IC06, IC17, IC37, IC410, IC416, IC666, IC86W;
• Insulation class: F /H;

Standard sizes: DMP 112-2MA, DMP 112-2LA, DMP 112-4M, DMP 112-4L, DMP 132-2L, DMP 132-2L, DMP 132-4M, DMP 132-4LB, DMP 132-4LB, DMP 160-4S, DMP 160-4SO, DMP 160-4M, DMP 160-4M-4MO, DMP 160-4L, DMP 160-4LB, DMP 160-4LB, DMP 180-4M, DMP 180-4L, DMP 180-4LB, DMP 180-4LB, DMP 180-4LC, DMP 180-4LC.

Installable options: feedback sensors (tachogenerators, encoders, resolvers), temperature sensors (PTO, PTC, PT100, KTY84), vibration measurement sensors, brush wear monitoring sensors, bearing lubrication replenishment, reinforced bearings, terminal box adaptation, adaptation of the height of the shaft axis of the electric motor using adapter frames, etc.

Technical characteristics of ABB /ABB DC motors of the DMP series

If you have any questions about the selection of DC motors ABB /ABB DMP series, please contact our engineers by phone. saluteh.