Sanitary seat valve DIN type 210 (L,L type) S.S.304 welded (analog Alfa Laval Unique SSV DN 65-200)
The seat valve is a type of hygienic valves with pneumatic actuator, which are used in a wide range in the food industry, beverage industry, pharmaceutical and chemical industries.
Design and characteristics
- Compact and durable design. Certified.
- Available sizes: from DN 25/1" to DN 100/4".
- Normally closed valve (NC) in the standard version.
- The valve opens to the normally open (NO) position by simply turning the pneumatic actuator.
- Hygienic design in accordance with the standards.
- 360° adjustable housing.
- Easy installation/disassembly of internal parts.
- Standard welded joints (mm or inches).
Options
- Gaskets: FPM (Viton(R)) in accordance with FDA 177.2600 Connections: DIN, Clamp, SMS, RJT. FIL-IDF, etc. double-acting pneumatic actuator.
- The drive is equipped with "Twin-Stop" position sensors.
- Steam barrier (if rod sterilization is required).
- C-TOP control unit.
- Surface treatment: Ra0.5 m
- Manual operation.
- Material and roughness certificates.
The principle of operation
- Single-seat valves are controlled automatically by means of a one-way or double-acting pneumatic actuator due to the supply of compressed air. The shaft moves the valve to the "open" or "closed" position.
- The rotation of the pneumatic cylinder with a single-acting 180° drive allows you to have a normally open or normally closed valve.
Materials:
- Parts in contact with the product: AISI 316L. AISI 304
- Other stainless steel parts: AISI 304
- Gasket: EPDM according to FDA 177.2600
- Inner Surface treatment: Ra £ 12:08 pm
- The outer surface: polishing
Technical specifications
- Доступные размеры: DN 25 - DN 100 DN 1 "- DN 4"
- Рабочая температура: от -10 до + 5С 120cc (EPDM), 145 до 248°F +140 CC 284 5F Max (SIP макс 30 мин..).
- Working pressure: 10 bar 145 PSI
- Compressed air pressure: 6-8 bar 87-116 PSI
- Air Connections: G1/8"(BSP)
The Alfa Laval Unique SSV single-seat reverse valve meets the highest hygiene and safety requirements. Assembled on the basis of the well-proven Unique SSV platform, it provides many options for avoiding hydraulic shocks in cases where the pipeline does not allow closure against the flow of products using standard single-seat valves.
This is a pneumatic seat valve of hygienic and modular design, having a wide range of applications, for example, as a shut-off valve with two (2) or four (4) nozzles, or a switching valve having from three (3) to six (6) nozzles. The valve is remotely controlled by compressed air.
Temperature
Temperature range, standard lip seal: . . . . . . . . . . . . -10°C to +140°C (EPDM)
Pressure
Макс. давление продукта: . . . . . . . . . . 1000 kПа (0,10 бар)
Min. product pressure: . . . . . . . . . . . Full vacuum
Air pressure: . . . . . . . . . . . . . . . from 500 to 700 kPa (from 5 to 7 bar)