Company Marelli Motori has developed a wide range of models marine alternators a variety of designs and a wide range of power values up to 11,000 kVA covering low, medium and high levels. These are high-quality, safe, efficient and well-prepared working units for the conditions of the sea.
The device body is made of a rigid steel frame and shields made of high-strength cast iron with spherical graphite or gray cast iron, and structural steel is also used. The shaft material is laminated carbon steel, forged and with a diameter of 290 mm and above. The stator/rotor windings are coated with unsaturated polyester and polyamide resins, insulation class – H (synthetic enamel). Protection against radio interference of class B (EN 55011). It is installed horizontally, IM 1001 or IM 1101 in accordance with IEC 60034-7.
The heat exchanger is installed in the upper part of the generator, the pipe is made of P - AIMgSi UNI 3569 alloy.
Technical characteristics of the MJVM series of marine generators with airtight shell with air/air cooling (TEAAC)
- Rated power for 4-pole generators: up to 3500 kVA;
- Rated power for 6-pole generators: up to 4,300 kVA;
- Rated power for 8-pole generators: up to 5600 kVA;
- Rated power for 10-pole generators: up to 5600 kVA;
- Rated power for 12-pole generators: up to 4600 kVA;
- Rated operating voltage: up to 1000 V;
- Industrial frequency: 50 Hz (European standard)/60Hz (North American standard);
- Overall height: 250 – 900 mm;
- Mounting design: IM 1001, IM 1101 in accordance with IEC 60034-7;
- The degree of protection of the case: IP44, IP56;
- Degree of protection: IC 611;
- Insulation class: H;
- Temperature class: H/H.