Flexible Control Cables TKD Kabel KAWEFLEX 6100 ECO SK-PVC UL/CSA

Flexible cable of the economical series KAWEFLEX 6100 ECO SK-PVC UL/CSA productions TKD kabel (TKD cable) It is used to connect and control various types of mobile equipment, installed in tow chains. It meets the high requirements of electrical parameters, is recommended for light and medium degrees of mechanical loads.

The shell materials do not contain silicone, the surface has a low adhesion effect. It has a permit for joint laying with other low-voltage wires with a nominal value not higher than 0.6 V.

Technical characteristics of the KAWEFLEX 6100 ECO SK-PVC UL/CSA control cable:

Number of conductive cores: up to 25;
Core cross-section: up to 2.5 mm²;
Conductor: copper, thin-wire;
Configuration: Class 5, according to DIN VDE 0295 and IEC 60228;
Core marking: according to VDE 0293, black with white numbering, yellow-green grounding wire;
Twist: layered;
Insulation material: Polyvinyl chloride;
Outer shell: polyvinyl chloride;
Operating voltage: 0.3 - 0.6 kV;
Test voltage: 4 kV;
Conductor resistance (20 °C): Class 5 (DIN VDE 0295, IEC 60228);
Insulation resistance (20 °C): 20 mOhm x km;
Minimum bending radius (stationary): 4 x Cable diameter;
Minimum bending radius (in operation): 10 (12.5) x Cable diameter;
Temperature (stationary): -40 ° C /+90 °C;
Temperature (movable): -5 °C /+90 °C;
Maximum operating speed: up to 180 meters/min;
Insulation material properties: does not contribute to the spread of fire, according to IEC 60332-1-2, FT1, VW-1;
Standards: UL/CSA - cURus 600B, 90°C;
Environmental requirement: oil resistance according to EN 60811-2-1.