Description
Features
Reviews
Main Features
| product series | Built-in Lexium drive | |
|---|---|---|
| the type of device or its accessories | Built-in motion control drive | |
| short name of the device | THEY | |
| engine type | 3-phase stepper motor | |
| number of motor poles | 6 | |
| number of network phases | Single-phase | |
| [Us] rated supply voltage | 24 V 36 V |
|
| network type | Direct current | |
| communication interface | Integrated Profibus DP | |
| length | 200.6 mm | |
| type of winding | High rotation speed and medium torque | |
| electrical connection | Industrial connector | |
| brake | Without | |
| type of gear transmission | Without | |
| rated speed | 100 rpm in 24 V 300 rpm in 36 V |
|
| rated torque | 4.5 N-m | |
| starting torque when the rotor is braked | 4.5 N-m |
Additional features
| transfer rate | 9,6; 19,2; 45,45; 93,75; 187,5; 500; 1500; 3000; 6000 и 12000 Кбод | |
|---|---|---|
| mounting support | Flange 85 mm | |
| motor flange size | 85 mm | |
| number of engine exhaust pipes: | 3 | |
| diameter of the centering ring | 60 mm | |
| centering ring depth | 2 mm | |
| number of mounting holes | 4 | |
| diameter of mounting holes | 6.5 mm | |
| diameter of the circumference of the mounting holes | 99 mm | |
| type of feedback | Pulse indicator | |
| shaft end | Without slots | |
| the second shaft | Without the end of the second shaft | |
| shaft diameter | 14 mm | |
| shaft length | 30 mm | |
| supply voltage limits | 18...40 V | |
| current consumption | 6000 mA (maximum) | |
| the corresponding fuse rating | 10 A | |
| type of in/out. | 4 signals (each used as input or output) | |
| the limit level of voltage switching in the 0 state | -3...4.5 V | |
| the limit level of voltage switching in state 1 | 15...30 V | |
| digital input current | <= 10 мА при 24 В вкл./STO_A для защищенный вход <= 3 мА при 24 В вкл./STO_В для защищенный вход 2 mA at 24 V for a 24 V signal interface |
|
| digital output voltage | 23...25 In | |
| max. switching current | 100 mA output 200 mA total |
|
| types of implemented protections | Output voltage overload Protective shutdown of the engine when the torque is exceeded Output short circuit |
|
| peak starting torque | 4.5 N-m | |
| continuous torque | 4.5 N-m | |
| speed feedback resolution | 20000 point/revolution | |
| error rate | +/- 6 angle min. | |
| rotor inertia | 3.3 kg·cm2 | |
| maximum mechanical speed | 2000 rpm | |
| maximum radial force Fr | 110 N | |
| maximum axial force Fa | 30 N (compression force) 170 N (tensile force) |
|
| service life in hours | 20,000 gn from bearing : | |
| marking | THIS | |
| type of cooling | Natural convection | |
| Product weight | 4.7 kg |
Operating conditions
| standards | EN 50347 EN 61800-3 :2001, Wednesday 2 EN 61800-3:2001-02 EN/IEC 50178 EN/IEC 61800-3 IEC 60072-1 IEC 61800-3, ed. 2 |
|
|---|---|---|
| Product certification | CUL TÜV UL |
|
| Ambient operating temperature | > 50...65 °C with a 2% reduction in rated power for each additional °C 0...50 °C without deterioration of nominal values |
|
| permissible air temperature around the device | 105 °C (power amplifier) 110 °C (engine) |
|
| ambient temperature during storage | -25...70 °C | |
| working height | <= 1000 м без ухудшения номинальных значений | |
| relative humidity | 15...85 % non-condensing | |
| vibration resistance | 20 m/s² (f=10...500 Hz) for 10 cycles according to EN/IEC 60068-2-6 | |
| Impact resistance | 150 m/s2 for 1000 strokes according to EN/IEC 60068-2-29 | |
| degree of IP protection | IP41 shaft sleeve in accordance with EN/IEC 60034-5 IP54 for everything except the shaft sleeve in accordance with EN/IEC 60034-5 |
Features
Brand
Schneider
No reviews yet — yours could be the first.
All reviews 0
Список отзывов пуст