TKD Kabel ELITRONIC CY LIYCY UL/CSA Data Cable

Flexible shielded cable ELITRONIC-CY LIYCY UL-CSA manufactured by TKD kabel (TKD cable) with color-coded cores according to UL/CSA standards. It is used as a control, signal, connecting cable for the transmission of analog and digital signals in measuring, control equipment and computer systems. It is intended for stationary installation and for flexible connection in free movement without tension load, and without forced motion control. It is used for laying in dry and damp rooms, but not for laying in the soil. It can be used outdoors, only with UV protection and temperature-sensitive.

Technical specifications:

Number of conductive cores: up to 24; Core diameter: up to 1.0 mm2;

Conductor: tinned copper wire.

Core structure: made of seven or nineteen wires.

Insulation: PVC.

Core marking: according to DIN 47100, the outer shell is gray, according to the IEC color code, the outer shell is black.

Twisting method: optimal steps with layered winding of the veins.

Overall screen: tinned copper wire braid, 85% coating.

The material of the outer shell of the ELITRONIC-CY LIYCY UL/CSA cable: PVC.

Shell color: black or gray.

Rated voltage: 300 V.

Wire resistance: according to DIN VDE 0295 cat. 2, corresponds to IEC 60228 cat. 2.

The minimum bending radius is stationary: up to 12 mm - 5 x cable thickness; up to 20 mm - 7.5 x cable thickness; more than 20 mm - 10 x cable thickness.

Minimum bending radius in motion: up to 12 mm - 10 x cable thickness; up to 20 mm - 15 x cable thickness; more than 20 mm - 20 x cable thickness.

Stationary temperature: -30 C /+80 C.

Temperature in motion: -5 C /+70 C.

Insulation properties: according to IEC 60332-1 (difficult to ignite, self-extinguishing).

Standard: UL-Stule 1061, UL-Stule 2464 and CSA AWM I/II A.

Standards: UL and CSA.

 

Environmental requirements:

The ELITRONIC-CY LIYCY UL/CSA cable is resistant to alkalis, acids, and certain types of technical oils.

Organosilicon rubber is not used in production.

It is recommended for use with electromagnetic compatibility.

It is amenable to clamping, soldering, crimping and cutting.