Cable INDUCOM ARCTIC RE-H(St)HSWAH-fl productions TKD kabel (TKD cable) It is designed to transmit data and signals in analog or digital form for measuring equipment, controllers or computer systems. It has a reinforced solid structure, has a high level of protection from interference and low attenuation. It is suitable for use in intrinsically safe installations for the 1st and 2nd explosive zone of Group II, according to IEC 60079-14 standard. Shielded aluminum film, as well as protected by solid armor made of flat or round steel wire.
Materials of cable sheaths They do not contain halogens. It can be used not only indoors, but also outdoors (frost-resistant) and for underground laying. It is resistant to chemicals of various kinds (acids, alkalis, oils), the influence of ultraviolet rays, and is immune to moisture content in the air. The lines are carried out underground in accordance with the requirements of building codes.
Technical specifications of the INDUCOM ARCTIC RE-H(St) data cableHSWAH-fl:
Number of conductive cores: up to 48;Core cross-section: up to 1.5 mm2;
Conductor: copper, 7-wire;
Configuration: Class 2, according to DIN VDE 0295 and IEC 60228;
Vein marking: for pairs, one color is black or white with numbering;
Twisting: in layers;
Insulation material: halogen-free connection, frost-resistant;
Contact protection layer: 23 microns thick polyester film;
Screen: common, located on top of insulation, material - laminated aluminum film, drainage wire made of tinned copper;
Inner shell: halogen-free compound, frost-resistant;;
Protective shield: round or flat shaped steel wire armor (galvanized), located between PVC sheaths;
Outer shell: halogen-free compound, frost-resistant;
Operating voltage: 0.5kV;
Test voltage: up to 2 kV;
Conductor resistance: 12.3 - 36.7 ohms/km depending on the cross-sectional area;
Insulation resistance: minimum 100Mohm;
Capacity: up to 200 nF/km (for a cross section less than or equal to 1 mm2 up to 190 nF/km);
Minimum bending radius (stationary): 10 x Diameter;
Temperature (stationary): -60 °C /+50 °C;
Temperature (movable): -30 °C /+50 ° C;
Insulation material properties: does not contribute to the spread of fire, according to IEC 60332-1-2 and IEC 60332-3-24 (category C), IEC 60332-3-22 (Category A);
Environmental requirements: oil-resistant, resistant to aggressive chemicals (acids, alkalis, oils), UV radiation, unlimited outdoor and indoor operation.
