LZX851 cable 20ms cable OMSS connector

The sensor uses an ultrasonic pulse to measure the sediment level. To ensure the highest level of accuracy, automatic sensitivity adjustment is performed for the concentration of settling suspended particles and the precipitation profile.The ultrasonic signal sent by the sensor is directed to the sediment layer in the tank. The determination of height and depth is based on the time it takes for the ultrasonic echo to return to the sensor. The measurement results are displayed on the controller display. An efficient automatic cleaning system to keep the ultrasonic emitter clean. To ensure calibration stability over a long period of time, the calibration of the industrial sensor is performed at the factory. With a simple correction factor, adjustments can be made according to local conditions. Sediment levels can be determined in a wide range of applications in wastewater and drinking water treatment plants. The ideal solution for monitoring the solid/liquid interface. Various designs (pipes, mixers, etc.) in settling tanks can be taken into account.

• Safe: Early warning system prevents from silt loss
• It is established that the measured values do not depend on the content of suspended solids and water temperature
• Accurate: An unsurpassed level of accuracy thanks to automatic frequency adjustment
• Reliable: correct measured values even for profiles with high levels of vibration
• Clarity: graphical representation of the sediment profile using the SC1000 controller