Cable for KAWEFLEX ServoDriveQ C-PVC servomotors manufactured by UL/CSA TKD kabel (TKD cable) It serves as a data conductor for digital interfaces of the DRIVE-CLiQ brand, speed limit up to 100 Mbit/s, complies with the SIEMENS Standard MOTION-CONNECT 200 communication standard. The gasket is fixed or flexible (limited), used both indoors and outdoors (protected from ultraviolet light).
The materials of the cable shells do not contain silicone, have excellent resistance to fire, oils, and are immune to moisture content in the air.
Technical characteristics of the KAWEFLEX ServoDriveQ C-PVC UL/CSA servo cable:
Number of conductive cores: 4;
Core cross section: 0.22 mm2;
Core diameter: 6.85mm;
Operating voltage: up to 0.3kV;
Test voltage: 0.5 kV;
Conductor: copper, 7-wire;
Insulation material: Polyethylene foam (PPE);
Screen: a common aluminum film with a 100% surface coating, a copper (tinned) braid with a surface coating of about 85% on top, the contacts are additionally protected by a synthetic film of fleece and foil;
Vein marking: Yellow/Green, Pink/Blue;
Method of twisting: in pairs, filler;
Outer shell: polyvinyl chloride;
Wire resistance: up to 87.6 ohms/km;
Rated capacity: 50 nF/km 800 Hz;
Minimum bending radius (fixed): 7.5 x per cable diameter;
Minimum bending radius (in operation): 15 x per cable diameter;
Temperature (stationary): -20 °C /+80 °C;
Insulation material properties: does not contribute to the spread of fire, according to EN 60332-2-1, UL: VW1; CSA: FT1;
Standards: UL/CSA - cURus 300 V, 80°C;
Environmental requirements: oil resistance according to EN 60811-2-1, unlimited indoor and outdoor operation, the possibility of laying with other wires with a nominal value of not more than 0.3 kV.
