Кабели для моторов и сервокабели TKD Kabel KAWEFLEX ServoDriveQ SK-C-PUR UL/CSA

Cable for KAWEFLEX ServoDriveQ SK-C-PUR UL/CSA servomotors manufactured by TKD kabel (TKD cable) It serves as a data conductor for digital interfaces of the DRIVE-CLiQ brand, speed limit up to 100 Mbit/s, complies with the SIEMENS Standard MOTION-CONNECT 800 communication standard. It is suitable for conditions with high requirements, namely for flexible laying and use in cable tow chains, both indoors and outdoors (UV protected).

The materials of the cable shells do not contain silicone, have excellent resistance to fire, oils, and are immune to moisture content in the air.

Technical specifications of the KAWEFLEX ServoDriveQ SK-C-PUR UL/CSA servo cable:

Number of conductive cores: 4 (AWG26) /3 (AWG22);
Core cross section: 0.15(AWG26) /0.38 (AWG22) mm²;
Core diameter: 6.95mm;
Operating voltage: up to 0.3kV;
Test voltage: 0.5 kV;
Conductor: copper (AWG22 tinned), 19-wire;
Insulation material: Polyolefin;
Screen: a common aluminum film with 100% surface coating, a copper (tinned) braid with a surface coating of about 85% on top, contacts are additionally protected by a fleece film (synthetic);
Vein markings: Yellow/Green, Pink/Blue (AWG26) /Red/Black (AWG22);
Method of twisting: in pairs, filler;
Outer shell: polyurethane foam;
Wire resistance: up to 135 ohms/km (AWG26) /up to 55 ohms/km (AWG22);
Rated capacity: 50 nF/km 800 Hz;
Minimum bending radius (fixed): 35 mm;
Minimum bending radius (in operation): 105 mm;
Temperature (stationary): -20 °C /+80 °C;
Temperature (movable): -20 °C /+60
Insulation material properties: does not contribute to the spread of fire, according to EN 60332-2-1, UL: VW1; CSA: FT1;
Standards: UL/CSA - cURus 300 V, 80°C;
Environmental requirements: oil resistance according to EN 60811-2-1, unlimited indoor and outdoor operation, the possibility of laying with other wires with a nominal value of not more than 0.3 kV.