Valve E4325 230V, AC

Valve E4325 230V, AC

Series D4021 /10 - B4028 /10
The Type 40 solenoid valve for gases and liquids that do not contain solid particles has a pilot control type.
A valve with a rubber diaphragm. Small, low-capacity solenoids are used for large nominal widths, so that the valve can be easily assembled at a reasonable price. The Type 40 valve is not only used to shut off water and air pressure, but also for complex applications in general engineering and mechanical engineering. The minimum pressure drop is 4.26 pounds per square meter. An inch (0.3 bar) is required between the inlet and outlet of the valve.

Valve E4325 /0806/3702-XX 230 V, AC

Technical information

• Version E
• Solenoid valve type 43, 2/2-way, with forced control
• Connection type, valve seat 25 G1, 25 mm
• Housing 08 1.4408 /1.4571 AISI 316 Ti
• Seal 06 EPDM
• AC type 3 voltage
• Solenoid power 70 25 W
• Degree of protection 2 IP65
• Valve variant XX NC - normally closed
• System pressure 0 - 16 bar
• Magnetic voltage 230V, AC
• The average temperature is from -30 ° C to + 80 ° C
• Ambient temperature from -20 ° From up to + 40 ° C
• Mounting position optional, preferably in an upright position
• A specific use case for a closed system,
• Package contents: 1 valve, 1 solenoid .702 360° rotatable, 1 plug EN 175301-803 Form A, with rectifier,
• IP65