Комплект линии упр. 350°C с рег. сос. №:1400-8900 Samson, Ст. д/мембр. пов. 40/80cm2, DN40+50
Application:
Bypass valve for setpoints from 0.75 to 400 psi /0.05 to 28 bar · Valves with nominal size NPS from ½ to 4 /DN 15 to 100 ·
Nominal pressure Class 125 to 300 /PN 16 to 40 · for liquid,
Gaseous and vaporous media up to 660 ° F /350 ° C
The valve opens when the pressure in front of the valve increases.
Characteristic features
• Maintenance-free P-controller with medium control, no auxiliary power required
• Sealing of the cork with anti-corrosion coating stainless steel bellows
• Control line kit for direct pressure tapping
Housing as an accessory
• Wide range of setpoints and convenient setting of setpoints on a given nut
• The drive and the setpoint spring are interchangeable
• Spring-loaded single-seat valve with pre- and post-pressure relief
1) Stainless steel bellows
• For high tightness requirements with a soft
sealing cone
• Low noise standard cone
• All wetted parts are non-ferrous.
A bypass valve for regulating the inlet pressure p1 to a set value. The valve opens when the pressure increases.
- Type 41-73 · The standard version
Valve Type 2417 · Valve NPS ½ to 4 /DN 15 to 100 · with metal sealing cone · body made of grey cast iron A126B, cast A216 WCC or corrosion resistant Cast steel A351 CF8M · Drive type 2413 with rolling diaphragm EPDM