Description
Features
Reviews
Main Features
| range | TeSys | |
|---|---|---|
| Product name | TeSys D | |
| the type of device or its accessories | Contactor switch | |
| short name of the device | LC2D | |
| contactor application | Active load | |
| Application category | AC-1 | |
| Product configuration | Pre-assembled with a power reverse busbar | |
| description of the poles | 4P | |
| configuration of the main contacts | 4 N.O. | |
| [Ue] rated operating voltage | <= 460 В постоянный ток для силовая цепь <= 1000 V переменный ток 25...400 Hz для силовая цепь |
|
| [Icw] rated short-term permissible current | 200 A (<= 60 °C) в <= 440 V переменный ток AC-1 для силовая цепь | |
| type of control circuit | Per. Current 50/60 Hz | |
| control circuit voltage | 220 V lane Current 50/60 Hz | |
| [Up] rated pulse withstand voltage | 8 kV in accordance with IEC 60947 | |
| Overvoltage category | III | |
| [Ith] conditional thermal current in the open air | 200 A V <= 60 °C для силовая цепь | |
| Rated switching capacity of Irms | 1260 A to 440 V for power circuit according to IEC 60947 | |
| rated breaking capacity | 1100 A to 440 V for power circuit according to IEC 60947 | |
| [Icw] rated short-term sustained current | 1100 A <= 40 °C 1 с силовая цепь 250 A <= 40 °C 10 мин силовая цепь 550 A <= 40 °C 1 мин силовая цепь 950 A <= 40 °C 10 с силовая цепь |
|
| the corresponding fuse rating | 200 A gG in <= 690 V координация тип 2 для силовая цепь 250 A gG in <= 690 V координация тип 1 для силовая цепь |
|
| average total resistance | 0.6mOhm V 50 Hz - Ith 200 A for power circuit | |
| [Ui] rated insulation voltage | 1000 V for power circuit according to IEC 60947-4-1 600 V for CSA certification power circuit 600 V for UL certification power circuit |
|
| electrical wear resistance | 0.8 Mcycles 200 A AC-1 <= 440 V | |
| power dissipated by one pole | 24W AC-1 | |
| protective cover | With | |
| type of blocking | Mechanical | |
| mounting support | Panel mounting The rail |
|
| standards | CSA C22.2 № 14 EN 60947-4-1 EN 60947-5-1 IEC 60947-4-1 IEC 60947-5-1 UL 508 |
|
| certification | br>CSA CCC EAC GL BV DNV RINA |
|
| accessions | Control circuit : screw clamp 2 cable(s) 1...2.5 mm2 - cable stiffness: flexible - without cable tip Control circuit : screw clamp 2 cable(s) 1...2.5 mm2 - cable stiffness: flexible - with cable tip Control circuit : screw clamp 2 cable(s) 1...2.5 mm2 - cable stiffness: rigid cable - without cable tip Control circuit : screw clamp 1 cable(s) 1...2.5 mm2 - cable stiffness: flexible - with cable tip Control circuit : screw clamp 1 cable(s) 1...2.5 mm2 - cable stiffness: flexible - without cable tip Control circuit : screw clamp 1 cable(s) 1...2.5 mm2 - cable stiffness: rigid cable - without cable tip Power circuit : connector 1 cable(s) 10...120 mm2 - cable stiffness: flexible - without cable tip Power circuit : Connector 2 cable(s) 10...50 mm2 - cable stiffness: flexible - without cable tip Power circuit : connector 1 cable(s) 10...120 mm2 - cable stiffness: flexible - with cable tip Power circuit : Connector 2 cable(s) 10...50 mm2 - Cable stiffness: flexible - with cable tip Power circuit : connector 1 cable(s) 10...120 mm2 - cable stiffness: rigid cable - without cable tip Power circuit : Connector 2 cable(s) 10...50 mm2 - cable stiffness: rigid cable - without cable tip |
|
| tightening torque | Control circuit : 1.2 N-m - screw clamp - flat with a screwdriver. Ø 6 mm Control circuit : 1.2 N-m - screw clamp - using a Philips No. 2 screwdriver Power circuit : 12 N-M - 4 mm hex socket |
|
| Response time | 6...20 ms shutdown 20...50 ms switching on |
|
| a safe level of reliability | B10d=1369863 cycles contactor with rated load according to EN/ISO 13849-1 B10d=20000000 cycles contactor with mechanical load according to EN/ISO 13849-1 |
|
| mechanical wear resistance | 8000000 cycles | |
| Operating frequency | 2400 cycle/h in <= 60 °C |
Additional features
| the technology of using coils | Built-in symmetrical protective zener diode | |
|---|---|---|
| voltage limits of the control circuit | 0.3...0.5 Uc release at 55 °C, alternating current 50/60 Hz 0.8...1.15 Uc is in operation at 55 °C, alternating current 50/60 Hz |
|
| power consumption when triggered | 280...350 V·A at 20 °C (cos ϕ 0.8) 60 Hz 280...350 V·A at 20 °C (cos ϕ 0.8) 50 Hz |
|
| power consumption during holding, V·A | 2...18 V·A at 20 °C (cos ϕ 0.3) 60 Hz 2...18 V·A at 20 °C (cos ϕ 0.3) 50 Hz |
|
| heat transfer | 3...8 Watts at 50/60 Hz |
Operating conditions
| degree of IP protection | IP20 front panel in accordance with IEC 60529 | |
|---|---|---|
| protective design | TH in accordance with IEC 60068-2-30 | |
| degree of contamination | 3 | |
| Ambient operating temperature | -5...60 °C | |
| ambient temperature during storage | -60...80 °C | |
| permissible air temperature around the device | -40...70 °C at Uc | |
| working height | 3000 m without temperature degradation | |
| Fire resistance | 850 °C in accordance with IEC 60695-2-1 | |
| Fire resistance | V1 in accordance with UL 94 | |
| mechanical resistance | Vibration contactor is open 2 g (nom.), 5...300 Hz Vibration contactor is closed 4 g (nom.), 5...300 Hz Shocks The contactor is closed 15 g (nom.) for 11 ms Shocks The contactor is open 6 g (nom.) for 11 ms |
|
| height | 158 mm | |
| width | 334 mm | |
| depth | 148 mm | |
| Product weight | 7.4 kg |
Features
Brand
Schneider
No reviews yet — yours could be the first.
All reviews 0
Список отзывов пуст