Description
Features
Reviews
Main Features
| range | TeSys | |
|---|---|---|
| Product name | TeSys B | |
| the type of device or its accessories | Contactor | |
| short name of the device | LC1BM | |
| contactor application | Engine-heating-lighting | |
| Application category | AC-1 AC-3 |
|
| type of control circuit | Per. current | |
| coil type | Standard | |
| description of the poles | 3P | |
| configuration of the main contacts | 3 N.O. | |
| [Icw] rated short-term permissible current | 1000 A (<= 55 °C) переменный ток AC-3 для силовая цепь 1250 A (<= 40 °C) переменный ток AC-1 для силовая цепь |
|
| engine power, kW | 280 kW at 220...230 V alternating current 50/60 Hz 500 kW at 380...400 V alternating current 50/60 Hz 530 kW at 1000 V alternating current 50/60 Hz 530 kW at 415 V AC 50/60 Hz 560 kW at 440 V alternating current 50/60 Hz 600 kW at 500 V alternating current 50/60 Hz 670 kW at 660...690 V alternating current 50/60 Hz |
|
| vspom. contacts available on each contactor | 4 N.O. | |
| control circuit voltage | 220 V lane The current is 50...400 Hz |
Additional features
| voltage limits of the control circuit | 0.3...0.5 Uc release 50...400 Hz 0.85...1.1 Uc is in operation state 50...400 Hz |
|
|---|---|---|
| [Ui] rated insulation voltage | 1000 V - for power circuit - conforming to IEC 60158-1 1000 V - for power circuit - conforming to IEC 60947-4 1500 V - for power circuit - corresponding to VDE 0110 group C |
|
| switch design | Stationary | |
| mounting support | Tire support bracket Perforated mounting rails |
|
| tightening torque | Power circuit : 35 N-M - tires | |
| [Ue] rated operating voltage | <= 1000 V переменный ток 50/60 Гц для силовая цепь | |
| [Ith] conditional thermal current in the open air | 1250 A at <= 40 °C для силовая цепь | |
| Rated switching capacity of Irms | 10000 A at 1000 V alternating current for a power circuit according to IEC 60158-1 10000 A at 1000 V alternating current for a power circuit according to IEC 60947-4 |
|
| rated breaking capacity | 10000 A at 440 V for a power circuit according to IEC 60158-1 10000 A at 440 V for a power circuit according to IEC 60947-4 4000 A at 1000 V for a power circuit according to IEC 60158-1 4000 A at 1000 V for a power circuit according to IEC 60947-4 8000 A at 660...690 V for power circuit according to IEC 60158-1 8000 A at 660...690 V for power circuit according to IEC 60947-4 9000 A at 500 V for a power circuit according to IEC 60158-1 9000 A at 500 V for a power circuit according to IEC 60947-4 |
|
| the corresponding fuse rating | 1200 A aM at <= 440 V для силовая цепь 1200 A gI at <= 440 V для силовая цепь 1500 A gI at <= 440 V для силовая цепь |
|
| average total resistance | 0.18 mOhm at 50 Hz - Ith 1250 A for power circuit | |
| power dissipated by one pole | 180 W AC-3 - Ith 1250 A 280 W AC-1 - Ith 1250 A |
|
| power consumption when triggered | 1300 VA | |
| power consumption during holding, V·A | 31 VA 50/60 Hz | |
| Response time | 100...150 ms switching on 50...100 ms shutdown |
|
| mechanical wear resistance | 1200000 cycles | |
| Operating frequency | 120 cycle/h at <= 55 °C | |
| height | 490 mm | |
| width | 570 mm | |
| depth | 475 mm | |
| Product weight | 57 kg |
Operating conditions
| standards | BS 5424 IEC 60158-1 IEC 60947-4 NF C 63-110 VDE 0660 |
|
|---|---|---|
| Product certification | BV CSA RINA |
|
| protective design | TC TH |
|
| Ambient operating temperature | -5...55 °C | |
| ambient temperature during storage | -60...80 °C | |
| working height | 3000 m without temperature degradation |
Equipment warranty
| Period | The warranty period for this equipment is 18 months from the date of its commissioning, which is confirmed by the relevant document, but not more than 24 months from the date of delivery |
|---|
Features
Brand
Schneider
No reviews yet — yours could be the first.
All reviews 0
Список отзывов пуст