Conductix Crane and elevator cables-Wampfler GPM

Low Voltage Power and control Cables Conductix-Wampfler GPM they have a flexible structure and are designed for winding on coils of all types in accordance with the minimum bending index, including spring and motorized, for working with moving mechanisms at low dynamic loads (speed up to 60 m/min), cable booms.

As part of the cable, only halogen-free materials Suitable for outdoor and indoor use at any degree of humidity, a very economical offer.

Technical Characteristics of the Conductix-Wampfler GPM cable:

• Number of conductive cores: 3 - 5;
• Section of the vein: 2.5 - 6 mm2;
• Diameter: 9.0 - 16.0 mm;
• Rated voltage: 0.6 - 1 kV;
• Conductor: copper;
• Configuration: flexible Class 5 (IEC 60228);
• Marking of veins: 3G: green /yellow, blue, brown; 4G: green /yellow, brown, black, gray; 5G: green /yellow, blue, brown, black, gray;
• Twisting of veins: short length, fixed;
• Isolation: special compound based on polypropylene;
• The inner shell: special compound based on polyurethane;
• The outer shell: special compound based on polyurethane;
• Maximum operating speed (m/min): 60;
• Maximum tension (N/mm2): 12;
• Minimum bending radius: 6 x Cable diameter (coil), 4 x Cable diameter (anti-tension mode), 9 x Cable diameter (boom);
• The maximum permissible temperature for the conductor: +80 °C;
• The temperature is stationary: -30 °C ... +60 °C;
• Temperature is movable: -25 °C ... +60 °C;

Environmental requirements: outdoor and indoor use, resistant to UV radiation, oils, moisture, low flammability (IEC 60332-1, Class 3).