Conductix crane and elevator cables-Wampfler GPM-RF

Low Voltage Power and control cables Conductix-Wampfler GPM-RF They have a flexible structure and are designed for winding on coils of all types in accordance with the minimum bending index, including spring and motorized, for working with moving mechanisms at high dynamic loads (speeds up to 90 m/min).

As part of the cable, only halogen-free materials Suitable for outdoor and indoor use at any degree of humidity, reliable operation and excellent price-quality ratio.

Technical Characteristics of the Conductix-Wampfler GPM cable:

• Number of conductive cores: 3 - 39;
• Section of the vein: 2.5 - 185 mm2;
• Diameter: 13.0 - 58.8 mm;
• Rated voltage: 0.6 - 1 kV;
• Conductor: copper;
• Configuration: flexible Class 5 (IEC 60228);
• Marking of veins: for 4G and 3 + 3: brown, black, gray; over black with printed numbers; ground wire green-yellow, ;
• Twisting of veins: short length, around reinforced polypropylene or elastomeric filler;
• Isolation: 4G & 3 + 3: special cross-linked elastomer; 4G: special cross-linked elastomer; stranded: special compound based on polypropylene;
• The inner shell: special compound based on polyurethane;
• The outer shell: special compound based on polyurethane, green color;
• Maximum operating speed (m/min): 90;
• Maximum tension (N/mm2): 20;
• Minimum bending radius: 6 x Cable diameter (coil), 4 x Cable diameter (anti-tension mode), 9 x Cable diameter (boom);
• The maximum permissible temperature for the conductor: +80 °C;
• The temperature is stationary: -30 °C ... +60 °C;
• Temperature is movable: -25 °C ... +60 °C;

Environmental requirements: outdoor and indoor use, resistant to UV radiation, ozone, oils, moisture, low flammability (IEC 60332-1, Class 3).