Flexible cable Conductix-Wampfler TXP /TXP-D It is designed to work in harsh conditions with horizontal and vertical movements at high speeds and with guide elements. They provide power for mechanisms of various types of crane and conveyor equipment. An excellent combination of compact dimensions, small bending radii and abrasion-resistant materials. A reliable choice for long-term operation as part of cable systems with high dynamics, acceleration and constant bending.
Wide temperature range, frost-resistant, resistant to aggressive environments and other environmental factors. It does not contain halogens and silicone.
Technical Characteristics of the Conductix-Wampfler TXP /TXP-D cable:
- Number of conductive conductors: 1 - 24;
- Section of the vein: 1.5 - 185 mm2;
- Diameter: 8.5 - 35.2 mm;
- Rated voltage: 0.6 - 1 kV;
- Conductor: electrolytic copper;
- Configuration: flexible Class 5 (IEC 60228);
- Twisting: layered up to 11 veins, more than 12 in bundles;
- Marking of veins: up to 5 color coded DIN VDE 0293 part 308, over black with white numbering, green-yellow ground wire;
- Isolation: special compound based on polyester or thermoplastic elastomer TPE;
- Screen: tinned copper braid, coating surface about 85%;
- The outer shell: polyurethane (PUR), black color;
- Maximum operating speed (m/min): 210 (over on request);
- Maximum tension (N/mm2): 15;
- Minimum bending radius: 4 x Cable diameter (stationary installation), 5 x Cable diameter (festoon application), 7.5 x Cable diameter (with guide blocks);
- The maximum permissible temperature for the conductor: +90 °C;
- The temperature is stationary: -45 °C ... +90 °C;
- Temperature is movable: -40 °C ... +90 °C;
Standard sizes:12YHRD11YH, 12YHRDC11YH
Environmental requirements: outdoor and indoor use, resistant to UV radiation, ozone, oils, moisture, low flammability (IEC 60332-1).
