Hitachi Metals FTNCT-SB /FTNCT-PSB Crane and Elevator Cables

Low voltage crane cable Hitachi Metals FTNCT-SB /FTNCT-PSB It has excellent electrical and mechanical characteristics, withstands high levels of loads, and an optimal ratio of flexibility and elasticity. The copper shield provides electromagnetic compatibility conditions and anti-interference protection. Smooth and hard surface with high wear resistance.

It has a multi-level design of two types: layered laying with a common screen (SB) and paired cores with an individual screen for each pair (PSB).

Main application: use for installation in festoon (garland) suspension systems, for connecting mobile equipment and mechanisms using gaskets in towed chains, for lifts (vertical movement, torsion).

Frost-resistant, suitable for outdoor use.

Specifications of Hitachi Metals FTNCT-SB /FTNCT-PSB Flexible Shielded Cable:

• Number of conductive cores: 3 - 36;
• Section of the vein: 1 - 35 mm2;
• Diameter of the conductor: 1.3 - 9.9 mm;
• Rated voltage: 0.6 - 1 kV;
• Test voltage: 2.5 kV (5 min);
• Conductor: copper;
• Configuration: flexible;
• Twisting: short installation, in layers with a common screen or in pairs with an individual screen;
• Isolation: special connection;
• The inner shell: special connection, screed;
• Screen: tinned copper;
• The outer shell: special connection;
• Minimum bending radius: 6 x Cable diameter (movable);
• The maximum permissible temperature for the conductor: +90 °C;
• Conductor temperature in case of short circuit: +250 °C;
• Temperature (lower limit): -50 °C;

Environmental requirements: Outdoor and indoor use, oil resistant.