Hitachi Metals RELCT LV crane and elevator cables

Low voltage crane cable Hitachi Metals RELCT (LV) It has excellent electrical and mechanical characteristics, withstands high levels of loads, and an optimal ratio of flexibility and elasticity. Smooth and hard surface with high wear resistance.

Main purpose: working with cable drums and guide pulleys of various types while observing the recommended parameters of the minimum bending radius. It can also be used in cable chains, lifts, load-bearing drums.

Frost-resistant, suitable for outdoor use.

Technical Specifications of Hitachi Metals RELCT (LV) flexible cable:

• Number of conductive conductors: 3 - 30;
• Section of the vein: 2.5 - 95 mm2;
• Diameter of the conductor: 29 - 53 mm;
• Rated voltage: 0.6 - 1 kV;
• Test voltage: 2.5 kV (5 min);
• Conductor: copper;
• Configuration: flexible;
• Twisting: short styling;
• Isolation: special connection;
• The inner shell: special connection;
• Protective layer: braiding against the effect of twisting;
• The outer shell: special connection;
• Minimum bending radius: 10 x Cable diameter (movable);
• Maximum tensile load (N/mm2): 39;
• The maximum permissible temperature for the conductor: +90 °C;
• Conductor temperature in case of short circuit: +250 °C;
• Temperature (lower limit): -50 °C;

Environmental requirements: Outdoor and indoor use, oil resistant.