Crane cables from Prysmian Group they have the most compact dimensions (up to 30% less than analogues) while maintaining all indicators at the proper high level, and thanks to improved technology, the weight is reduced by 40%. They do an excellent job in harsh conditions, are resistant to repeated bending, abrasion and physical resistance.
Crane cable Prysmian (N)TSCGEWOEU TENAX TTS-LWL medium voltage (3.6-6 kV, 6/10 kV, 8.7-15 kV, 12/20 kV) with built-in optical fiber for combined transmission of energy and data in conditions extreme mechanical loads, namely, at high speeds of movement, dynamic tensile loads, multiple changes in the direction of movement (in different planes), torsion. They are mainly used on mobile equipment, for example for container cranes.
Technical characteristics of the crane cable Prysmian (N)TSCGEWOEU TENAX TTS-LWL:
Number of conductive cores: 3;Number of optical fibers: 6.12, 18 or 24;
Core cross-section: up to 240 mm2;
Core diameter: up to 21 mm;
Conductor: copper, thin-wire;
Configuration: Class 5 DIN VDE 0295;
Core marking: natural color insulation with a black semiconductor layer;
Insulation: rubber, EPR-SHS EI type connection;
Inner shell: rubber, special compound (equivalent to 5GM3);
Protective layer against the effect of torsion: reinforced with anti-torsion polyester braid;
Outer shell: special compound, equivalent to 5GM5, color red or black with yellow stripe;
Maximum operating speed (m/min): 180;
The maximum permissible temperature for the conductor: +90 C;
Stationary temperature: -40 °C ... +80 °C;
Movable temperature: -25 °C ... +80 °C;
Standard Sizes: (N)TSCGEWOEU;
Environmental requirements: unlimited outdoor and indoor operation, resistant to ozone, ultraviolet rays and moisture, oil resistance according to DIN EN 60811-404 and DIN VDE 0473-811-404, paragraph 10.
