Description
Features
Reviews
CAT.7 elevator cable manufactured TKD kabel (TKD cable) It is used for data transfer between a personal computer and an elevator cabin, or for network connection according to the specification of this type of cable (according to DIN EN 50288-4-2).
The design of this cable has two steel load-bearing cables in the structure of the outer shell, which allow it to be suspended to heights of up to 80 meters, and a relatively large cross-section in general allows you to increase the data transmission range. The gasket is in indoor conditions, it is immune to humidity.
Technical Specifications of CAT.7 elevator cable:
Number of conductive cores: 4;Operating voltage: 0.03kV;
Test voltage: up to 0.5 kV;
Conductor: copper, multi-wire;
Configuration: Class 5, according to DIN VDE 0295 and IEC 60228;
Vein marking: white, yellow;
Insulation material: special polymer compound, diameter about 1.35mm;
Method of twisting: in pairs, common - binding with filler;
Screen: laminated aluminum foil for pairs and general twisting, tinned copper braid on top;
Steam shell: special thermoplastic compound;
Inner shell: special compound based on polyvinyl chloride, purple color;
Outer shell: special compound based on polyvinyl chloride, black color;
Minimum bending radius (stationary): 10 x per cable diameter;
Minimum bending radius (in operation): 15 x per cable diameter;
Temperature (stationary): -40 ° C /+60 °C;
Temperature (movable): -20 ° C /+60 °C;
Maximum breaking load: 2000 N;
Maximum tensile load: 1500 N;
Environmental requirements: indoor operation at all concentrations of moisture in the air.
Features
Brand
TKD Kabel
No reviews yet — yours could be the first.
All reviews 0
Список отзывов пуст