Crane and elevator cables TKD Kabel LSOH

LSOH Flat Cable (Low Smoke Zero Halogen) manufactured TKD kabel (TKD cable) It is represented by two types: power and control (marking C). It is used in conditions of high mechanical loads in the form of frequent bending and movement in the same plane. It is recommended for connecting various kinds of transportation lines, cranes, elevators and other lifting systems, machine tools, etc.

The materials of the cable sheaths do not contain halogens and silicone. Due to the flat design, the bending radius is much smaller than that of round models. The maximum height of the suspension is 35 meters.

Technical Characteristics of LSOH flat cable:

Number of conductive cores: up to 5;
Core cross-section: up to 50 mm²;
Operating voltage: 0.3-1 kV;
Test voltage: up to 4 kV;
Conductor: copper, multi-wire;
Configuration: Class 5, according to DIN VDE 0295 and IEC 60228;
Vein marking: up to 5 veins are colored according to VDE 0293-308, over 5 are black with white numbering and a yellow-green vein;
Insulation material: special connection;
Twisting method: parallel, side by side;
Shield (for control cables only): copper braid, covering about 85% of the surface;
Outer shell: polyolefin;
Minimum bending radius (stationary): 10 x per cable diameter (15 x per cable diameter for control);
Minimum bending radius (in operation): 10 x per cable diameter (15 x per cable diameter for control);
Temperature (stationary): -40 ° C /+70 °C;
Temperature (movable): -25 °C /+70 °C;
Maximum temperature on the conductor: 90 ° C;
Insulation material properties: does not contribute to the spread of fire, according to EN 60332-2-1;
Environmental requirements: unlimited indoor and outdoor operation at any moisture concentrations in the air.