Description
Reviews
Logic controllers SIEMENS LOGO series 6AG1052-1HB00-2BA6, they are made in compact plastic cases, taking into account the IP20 protection class. They are intended for installation on standard profile DIN rails or on a vertical flat surface. Terminals for connecting the power supply circuit, as well as sensors or manual controls are located in the upper part of the housing. Terminals for connecting actuators are located in the lower part of the housing. The set of other elements depends on the type of a particular module. The internal bus interface is located in the right side wall of the housing of each module. At the time of delivery of the module, the internal bus interface is hidden behind a plastic cover. Special pins are mounted in the right wall of the housing of each expansion module, and a slider for moving the internal bus connector to the working position is located on the front panel. The simplest control devices can be built on the basis of a single logic module. To build more complex devices, it is supplemented with the necessary set of expansion modules. Data exchange with most expansion modules is performed via the internal bus of the logic module. The connection of the expansion module to its internal bus can only be performed if the pins fall into the special slots of the previous module. Analog and communication modules can be connected to any type of modules. To increase the overall performance of the control device, after the logic module, it is recommended to install first discrete, then analog, then communication expansion modules. In addition to the expansion modules, an external LOGO text display can be additionally connected to each logic module! TD to display the status of the lines, as well as when debugging the control system or troubleshooting.
No reviews yet — yours could be the first.
All reviews 0
Список отзывов пуст