Multistage pumps of the series IT IS from the company Pumping bacon They were designed specifically for operation as part of boiler installations, providing supply and circulation of water or solutions (small contamination is acceptable, without solid inclusions). Practical modular design, mounting on a base plate, horizontal orientation of the installation. The supply pipe is located radially upwards with respect to the axis of rotation, the suction one is on the side.
Cast iron with spherical graphite is used as the structural materials of the pump body, the impeller is made of gray cast iron. The shaft is made of corrosion-resistant steel and sealed with a mechanical (mechanical) seal or an oil seal. The drive unit consists of highly efficient three-phase electric motors with surface cooling and protection against penetration of water and dust.
Pumping liquids: water, condensate, distillate, solutions, etc.
Limitations: no abrasive particles.
Areas of application: boiler houses, water supply, sewage treatment plants, food industry, other industries and technological processes.
Technical characteristics of Speck Pumpen ES series multistage pumps
- Volume consumption: up to 120 m3/hour;
- Discharge height: up to 630 m;
- Nominal pressure (PN): 40 or 63 bar;
- Number of steps: 2 - 11;
- Liquid temperature: up to 120 °C;
- Installation: horizontal, on the base plate.
Standard sizes of Speck Pumpen pumps of the ES series
ES3202, ES3203, ES3204, ES3205, ES3206, ES3207, ES3208, ES3209, ES3210, ES3211
ES4002, ES4003, ES4004, ES4005, ES4006, ES4007, ES4008, ES4009
ES5002, ES5003, ES5004, ES5005, ES5006, ES5007, ES5008
ES6502, ES6503, ES6504, ES6505, ES6506, ES6507, ES6508, ES6509, ES6510
You can buy pumps for Speck Pumpen boilers of the ES series, find out the price and more information about the products by contacting our specialists.
