Main application areas
- Water
- Water intake
- Water supply
- Mining
- Oil /Gas
- Surface reversal
- General methods
- Lake water, water lifting dam
- Irrigation
- Sprinkling irrigation, irrigation
- Pressure increase, fire extinguishing installations
- Maintaining the groundwater level
- Fire fighting and sprinkler installations
- Lowering of the groundwater level
- Food products
- Industry and technological process
- Process
- Types of orders
- Water transportation
- Storage in caverns
Multistage centrifugal pump for vertical or horizontal installation, made entirely of stainless steel; intermediate bearing on each stage; stage housings are connected with metal brackets; built-in easily removable check valve; threaded or flanged outlet as an option; suction filter, drive lamp and valve body, made as a high-precision stainless steel casting; working the wheel is made using laser welding; suitable for drinking water according to the ACS standard; the permissible sand content is 50 g/m3. Pre-filled submersible motor; three-phase current; in a short-circuited version, with a self-centering thrust bearing and a properly sized expansion diaphragm for pressure equalization; the design complies with VDE standards; protection class IP 68; with a power cable. Applications: pumping of clean and slightly polluted water for household general water supply, in irrigation and sprinkling systems, for lower
Overview of technical data
| Q (50Hz) | 8.0 – 85.0 (m³/h) |
| H (50Hz) | 8.0 – 320.0 (m) |
| The outer case | yes |
| Type of bearing | slide underpin |
| Hole Diameter (inch) | 06 |
| Separation of the body | transverse (radial) |
| Type of impeller material (according to the standard | PPO GF30 |
| Drive | electric motor |
| Drive motor frequency | 50 Hz /60 Hz |
| Type of drive | electric motor |
| Drive motor voltage | low voltage |
| Electrical connector | < 1000 В, 3~ |
| 1. type of impeller | radial/diagonal |
| Number of impeller inputs | single-threaded |
| Other types of impeller | radial/diagonal |
| Impeller material (according to E standard | PPO GF30 |
| Type of lubricant | grease/grease with a pumped medium |
| Max. permissible liquid temperature | 50 (°C) |
| Maximum operating pressure | PN 40 |
| Shaft material (according to EN standard) | 1.4028, 1.4462 |
| The material of the stage body (according to the E standard | PPO GF30 |
| The material of the suction body (according to the standard | CC 480K, CUSN10, GJL 250, JL 1040 |
| Suction characteristics | non-self-priming |
| Acceptable for drinking water | yes |
| Type of connection | thread, flange |
| Type of stage housing | stage body with guide device |
| Type of suction housing | housing with an annular camera |
| Housing material (according to EN standard) | 1.4301, 1.4404, 1.4571, CC480K, JL1040 |
| eClass | 36410000, 36410100, 36410101, 36410106 |
| Installation position | horizontal or vertical |
| Type of shaft seal | shaft O-ring, mechanical seal |
| Housing material | grey cast iron, chrome nickel steel, stainless steel, bronze, chrome steel |
| Max. working pressure from the pressure sides | 36 (bar) |
| Max. drive power | 36 (kW) |
| Type of installation | stationary |
| Max. rotation speed | 3500 (1/min) |