Description
Features
Reviews
Cylindrical Coaxial m-reducer Watt Drive C Series
Technical specifications:
- Number of executions................... 18
- Power range................... 0,12 - 55kW
- Torque range.... 23 - 14.000Nm
- Reduction........................... From 0.8 to 13,500
- The variant of execution................ output shaft
- Installation /execution:............. flange, paws
Technical specifications
- Torque range, Nm....................... 27...14000
- Rated power, kW (n1=1400 rpm) ... 0.12...55
- Gear ratio.......................................... 0,8...8600
Types of output configurations
- Mounting on the flange and on the "paws"
- Metric or inch series of external cylindrical input shafts
Types of input configurations
- Adapters for motors according to IEC standard; NEMA
- Metric or inch series of external cylindrical input shafts
- AC motors used
- Built-in engines and brake motors of the WAR series
- IEC-standardized motors and motors with brake of the WAF series
- Single- and two-speed engines
- The main characteristics of the engine
- Thermistor and thermostatic sensors
- Separately powered reinforced ventilation
- Signal converter and push-pull incremental encoder
| Gearbox design : | Coaxial cylindrical gear motor | |
| Type designation : | CG002-11N-71-06E-TH-TF | |
| Operating conditions : | ||
| Ambient temperature : | +20 | °C |
| Operating mode : | S1 | |
| Electric motor data : | ||
| Series : | EUSA'S WAY | |
| Housing material : | Aluminum | |
| Efficiency coefficient n : | IE1-57.0% | |
| Series : | 11N | |
| Engine power : | 0.18 | [kW] |
| Nominal number of revolutions : | 905 | [rpm] |
| Rated torque : | 1.9 | [Nm] |
| Voltage : | 230/400 | [In] |
| Frequency : | 50 | [Hz] |
| Connection : | D/Y | |
| Rated current : | 1.3 /0.74 | [A] |
| The ratio of the inrush current to the rated current : | 3.3 | |
| 'cos φ' : | 0.62 | |
| Protection : | IP 55 | |
| Mounting position of the terminal box : | side 1 cable entry I | |
| Insulation class : | F | |
| Moment of inertia : | 0.77x10-3 | [kgm2] |
| Electric motor Options : | ||
| Fan : | Self-ventilation | |
| Temperature control : | Bimetallic switch NC contact (TH) and PTC thermistor (TF) for disconnection | |
| Ball Bearing : | Standard | |
| Gearbox data : | ||
| Maximum heat output at a temperature of +20 °C and operating mode S1 : | 1.2 | [kW] |
| Output speed : | 31 | [rpm] |
| The moment at the exit : | 56 | [Nm] |
| Service factor : | 0.90 | |
| Number of steps : | 2 | |
| Gear ratio : | 29.33 | |
| Angular backlash : | 11' - 32' | |
| Permissible input torque at fB1 : | 1.7 | [Nm] |
| The maximum speed on the input shaft of the gearbox : | 3000 | [rpm] |
| Mounting position : | M1 | |
| Output shaft : | Ø 20 k6 x 40 | [mm] |
| Keyway : | DIN6885.1 | |
| Painting : | LC1 - indoor installation, neutral atmosphere NDFT 60 µm (C1 - DIN EN ISO 12944-5) | |
| Colour : | RAL 7011 (Grey iron) | |
| Total weight : | 11.1 | [kg] |
| Connection to the electric motor : | ||
| Type : | Direct connection | |
| Input shaft : | Ø 09 j6 x 18,5 mm | |
| Inlet flange : | FC120 | |
| Gearbox Options : | ||
| Oil : | Mineral - CLP ISO VG 220 | |
Features
Brand
Weg
No reviews yet — yours could be the first.
All reviews 0
Список отзывов пуст