CUBIC pump 15 PP

Diaphragm pump CUBIC 15 PP

Compact diaphragm pump with two CUBIC 15 membranes

• Pump capacity – up to 17 l/min
• Connections – 3/8”
• Versions: PP – ECTFE

The main features of the CUBIC 15 pump

•  capacity up to 17 l/min; self-pumping of liquid up to 3 m.; operation in non-pressurized mode
•  pumping liquids containing solid and insoluble particles up to 0.5 mm in size.
•  pumping of very viscous liquids
•  smooth 0-100% performance adjustment by adjusting the air flow rate
•  support for operation in the "dry running" mode
•  performing the functions of a barrel pump
•  fire safety of the pump design without an electric drive
•  стандартное исполнение - сертификация ATEX II 3/3G D IIB T 135°C (zone 2)
•  the ability to operate in explosive atmospheres - ATEX II 2/2GD c IIB T 135°C (zone 1) certification
•  full immersion in the pumped medium (on request)
•  compact size, easy maintenance

Technical characteristics of the pump 

• Intake/Discharge holes G 3/8”
• Air inlet G 3/8”
• Max. the height of the fence in a dry state is * 3 m.
• Max. capacity 17 l/min.
• Max. head* 70 m.
• Max. The permissible inlet air pressure is 7 bar
• Max. the diameter of the solid particles is 0.5 mm.
• Material of execution PP ECTFE
• Max.temperature (zone 2) 60 95
• Net weight 1.0 kg 1.5 kg

* The data are based on tests obtained when installing the pump below the water level at a temperature of 20 ° C and may differ depending on the material of the pump design.