Converter TR-N5C-P30-3-XC074 2130X000X00
The TR series force transducers are used to measure the tension that acts on the plastic film or tape on the guide roller of the winding equipment. Mounted on the end of a stationary or rotating shaft on the machine chassis, they perform the function of a force sensor and support at the ends of the shaft. They are used on both fixed and rotating shafts.
TR converters are supplied with a flange adapter for fixing, with 4 M6 screws or with one in the center M10 or M12
-
- Measuring range: from 100 N to 2 kN
-
- Accuracy class: 0.5%
-
- Stainless steel
-
- Internally generated calibration signal
-
- Orientation of the maximum sensitivity axis for 35° regardless of the position of the fixed holes
-
- Degree of protection: IP65 (DIN 40050)
-
- Built-in overload protection
TR
• Measuring range: from 100 N to 2 kN
• Accuracy class: 0.5%
• Stainless steel
• Internally generated calibration signal
• Orientation of the maximum sensitivity axis for 35° regardless of the position of the fixed holes
• Degree of protection: IP65 (DIN 40050)
• Built-in overload protection
