Compact and efficient industrial Knoedler drives of the ZS-I /FZ series designed processes for feeding and dosing of raw materials for injection molding machines. Energy efficiency in operation and relatively low noise levels are the undeniable advantages of casting products on a fully electric power supply. A reduction in cycle time and a significant increase in production dynamics were achieved.
The linear block uses a special design based on toothed rails to increase power, 4- or 8-fold gear engagement, the force is compensated by a double helical transmission. Synchronous servo motors and the transmission of the intermediate shaft have a minimum moment of inertia, which also increases the level of work dynamics. The plasticizing unit is connected to the injection unit. For safe operation, water cooling is installed by means of a coil in the plasticizing transmission.
Technical characteristics of Knoedler ZS-I/-FZ injection molding machine drives:
- Compression force: 80 – 1300 kN;
- Maximum injection speed: 0.5 m/sec;
- Step: 100 – 450 mm;
- Output torque: 900 – 11500 Nm;
- Screw diameter: 20 – 100 mm.
Standard sizes of Knoedler ZS-I/-FZ injection molding machine drives
Type of drive | Injection force, kN | Step, mm | Torque, Nm | Screw diameter, mm |
ZS 81-I /FZ 81.3, FZ 121.3 | 80 | 100 | 900 | 20 - 40 |
ZS 201-I /FZ 121.3 | 200 | 160 | 1200 | 30 - 50 |
ZS 331-I /FZ 121.3 | 330 | 200 | 1800 | 30 - 50 |
ZS 451-I /FZ 151.3 | 450 | 240 | 2500 | 45 - 60 |
ZS 452-I /FZ 151.3 | 450 | 240 | 2500 | 45 - 60 |
ZS 652-I /FZ 251.3, FZ 501.3 | 650 | 320 | 6000 | 50 - 80 |
ZS 902-I /FZ 601.3, FZ 901.3 | 900 | 375 | 8000 | 70 - 100 |
ZS 1302-I /FZ 901.3 | 1300 | 450 | 11500 | 70 - 100 |
You can buy Knoedler injection molding machine drives of the ZS-I /-FZ series, find out the price and more information about the products of this brand by contacting our specialists.