Brake systems of the series SB 18 PXi from the company Pintsch Bubenzer A spring-loaded pressure mechanism and a pneumatic actuator are used to actuate it. This series is widely used in a wide variety of industries, in particular as part of steel plants, in the production of wire and cables, paper making, wood processing, etc.
Reliable and high-performance units, they are very easy to install, set up and maintain. Thanks to a special leveling mechanism, the brake pads wear out evenly throughout the allotted service life, wear is easily adjusted manually as needed, and changing with the help of spring clamps also does not require much effort.
Technical Characteristics of Pintsch Bubenzer SB 18 PXi industrial disc brakes
- Braking moment: it is calculated depending on the diameter of the disc*;
- Braking force: 3840 - 64210 N;
- Maximum pressure: 7 bar;
- Air gap: 1 mm;
- The thickness of the brake disc: 10 - 50 mm;
- Coefficient of friction: 0,3.
Parameters of standard sizes of Pintsch Bubenzer SB 18 PXi spring brakes
Type of brake system | Braking effort, N | The diameter of the brake disk, mm | The thickness of the brake disk, mm |
SB 18 PXi - 01 | 7410 | at least 200 | 10 |
SB 18 PXi - 02 | 3840 | at least 200 | 10 |
SB 18.1 PXi - 01 | 7410 | at least 200 | 20 |
SB 18.1 PXi - 02 | 3840 | at least 200 | 20 |
SB 18.2 PXi - 01 | 25550 | at least 500 | 38 |
SB 18.2 PXi - 02 | 19940 | at least 500 | 38 |
SB 18.2 PXi - 03 | 14960 | at least 500 | 38 |
SB 18.3 PXi - 01 | 46280 | at least 500 | 38 |
SB 18.3 PXi - 02 | 33730 | at least 500 | 38 |
SB 18.3 PXi - 03 | 22480 | at least 500 | 38 |
SB 18.8 PXi - 01 | 64210 | at least 600 | 50 |
SB 18.8 PXi - 02 | 55160 | at least 600 | 50 |
SB 18.8 PXi - 03 | 45660 | at least 600 | 50 |
SB 18.8 PXi - 04 | 34250 | at least 600 | 50 |
SB 18.9 PXi - 01 | 64210 | at least 900 | 50 |
SB 18.9 PXi - 02 | 55160 | at least 900 | 50 |
SB 18.9 PXi - 03 | 45660 | at least 900 | 50 |
SB 18.9 PXi - 04 | 34250 | at least 900 | 50 |
*The value of the braking torque is determined by calculation and depends on the size of the brake disc: Braking force (N) x 0.3 x d1 (mm) /1000
d1 - the friction diameter obtained by subtracting from the diameter of the brake disc a certain dimensional value individually for each model (indicated in the attached catalog)
0.3 is the coefficient of friction
You can buy Pintsch Bubenzer SB 18 PXi spring disc brakes, find out the price and more information about the products by contacting our specialists.
