Flowmeter Simag11-DN200-PN10 flanged, r/isp/, cable 10m, IP68
Appointment
The electromagnetic flowmeter SIMAG 11 is designed to measure, display and record the flow rate and volume of liquid that has passed through the sensing element (sensor) of the device. The flow meter can measure the flow rate and volume of liquid both in the forward and reverse directions.
The principle of operation
The principle of operation of the device is based on Faraday's law of electromagnetic induction, according to which an EMF is induced in a conductor moving in a magnetic field. The role of a moving conductor in the device is performed by an electrically conductive liquid, the magnetic field is created by coils, and the EMF is removed from special measuring electrodes. The measured EMF is proportional to the average flow rate in the pipeline, and with a known cross–section, to the volume flow rate.
Due to the principle of operation, the device is always covered from the inside with a layer of insulating material (lined).
Description
The SIMAG 11 flowmeter is designed to measure, display and record the flow rate and volume of liquid that has passed through the sensor of the device. The flow rate and volume of the liquid are measured in two directions - forward and reverse. The electromagnetic flowmeter has standard output signals, an advanced set of functions and a digital interface. The flow meter design has a separate design. The sensor and converter are connected by a special measuring cable. The electromagnetic flow meter can be controlled manually or remotely from a PC using the SIMASTER program.
Specifications
- The limit of permissible relative error of volumetric flow and volume: ± 0.5%
- Diameter ranges: from 10 to 1400 mm
- Working range of flow rates: from 0.02 to 10 m/s
- Working pressure: up to 4 Mpa
- Temperature range of the measured medium: -10...+150°C
- Ambient temperature range: -20...+50°C
- Outputs
- -current 4...20 mA, passive, U=12...30V
- -frequency, fmax=1.5kHz, passive, Umax=25V, Imax=50mA
- -pulse, max 50 imp/s, passive, Umax=25V, Imax=50mA
- Digital interface: RS-485 (Modbus, ASCII)
- Degree of protection: IP65, IP67 depending on the design
Application
- water treatment
- water supply
- metallurgy
- pulp and paper industry
- chemical industry
- food industry
- oil and mineral extraction
- HOUSING AND COMMUNAL SERVICES
- and others
Liquids for accounting
The electromagnetic flow meter is used to measure the flow of electrically conductive liquids with a minimum conductivity of 5 µcm/cm.
- clean water
- waste water
- acid solutions
- alkali solutions
- food products
- mixtures
- pulps and suspensions
- other electrically conductive media
Advantages
- Simulation verification
- High accuracy and stability of measurements
- Electrode self-cleaning function
- Detecting an empty pipeline
- Minimum requirements for straight sections
- Flow measurement in two directions
- Standard outputs: pulse, frequency, current
- Possibility of remote programming and data acquisition
- Real-time clock
- Non-volatile hardware log
- Operation in the heat meter mode