Vortex flow meter 8800D.F100SM2E2D1E8M5Q4YR

Rosemount 8800D Vortex Flow Meter 8800D.F060SM3E2D1E8M5Q4YR

Rosemount Vortex Flow Meter 8800D series

HART® and FOUNDATION™ fieldbus protocols

• Completely welded construction running water parts excludes clogging and It provides maximum performance, reliability and an increased level of safety, since the device does not have inlet openings and gaskets. Fully steel construction without sealing gaskets.
• Vortex flow meter CriticalProcess™eliminatesnecessaryIt allows the use of bypass lines and provides an optimal level of safety when checking the status of the sensor.
• It is being released with additional output MultiVariable™. Functioninternal temperature compensation provides the ability to measure the mass flow rate of saturated water vapor at the lowest cost.
• Adaptive processing digital signals (ADSP) provides stability to vibrations and it allows you to optimize the flow measurement range.
• Vortex flow meter Reducer™expands range ismeIt reduces the cost of installation and minimizes project risks.
• Using diagnostic functions the device significantly simplify the procedure search and troubleshooting of the device.
• Various variants execution: flanged, flanged, with built-in conical transitions, dual-touch and high-pressure

Rosemount 8800D flowmeters ensure trouble-free operation and maximum reliability of process lines

• Reliability Rosemount –inraskhThe 8800D series odomers lack pulse lines, slots and slots, which increases the reliability of measurements.
• Non- cloggingconstruction–unique the construction is without gaskets, in which there are no holes and cracks that can become clogged during operation.
• Stabilitytovibrations–achieved by balancing the mass of the sensor system and using an adaptive digital signal processing (ADSP) filter.
• Replaceablepiezoelectricsensor–sensor it is isolated from the technological process, and it can be replaced without stopping the technological process. Identical sensors are used in all standard sizes of flowmeters. This ensures interchangeability and reduction of spare parts inventory.
• Simplifiedproceduresearchandelimination fault diagnosis of the device allows you to check the electronic unit and sensor under operating conditions without stopping the technological process.

Variants of Rosemount 8800D flowmeters

• Flow metersseries 8800D They are being released in flanged 1/2 version with linear dimensions from 8 inches, and ASME B16.5, EN 1092-1 or JIS B2220 flanged 1/2 version with linear dimensions from 12 inches.
• Centering rings, supplied with flanged flowmeters (p. 30), they allow you to install the flowmeter coaxially with the pipeline without additional devices.
• Flanged, flanged execution and versions with welding nozzles are made of 316 stainless steel or nickel alloy.
• Produced with flanges ASME B16.5 pressure class up to 1500 for pipelines with DN from 25 to 200 mm (1-8 inches).
• The flowmeters support the functionality of FOUNDATION fieldbus, which includes the Device Diagnostics Device Diagnostics system and the PlantWeb warning signal generation system.