Our company supplies a wide range of imported brush holders for equipping the collector assembly of electric motors. Exclusively high-quality materials are used in production, casting and forming processes are carried out using modern CNC production lines. Thus, guaranteed accuracy of execution of the established formats is ensured, compliance with quality benchmarks for finished products. The robust, reliable design of the holders is the key to long-term operation and maximum effectiveness of their application.
The range of supplied brush holders Morgan AM, Schunk, Mersen, Carbone Lorraine, Morgan Rekofa, Pantrac, ATE Industriale for brush collector assembly of electric motors (all sizes in mm):
Brush holders with a single holder for one brush
Material: brass
Clamping part: extruded brass
Circumferential speed: up to 15 m/sec
The brush code- holder | Brush Sizes |
C | Hole | Width (E). | Fasteners (M) | |||
t | a | r | D | max. | ||||
84 D 30-7 | 8 | 4 | 16 | 30 | 7 | 8 | 7,5 | M3 |
85 D 30-7 | 8 | 5 | 16 | 30 | 7 | 8 | 8,5 | M3 |
105 D 38-7 | 10 | 5 | 16 | 38 | 7 | 8 | 8,5 | M3 |
126 D 36-10 | 12 | 6,3 | 20 | 36 | 10 | 13 | 10,5 | M4 |
128 D 40-10 | 12 | 8 | 25 | 40 | 10 | 13 | 12 | M4 |
168 D 44-10 | 16 | 8 | 25 | 44 | 10 | 13 | 12 | M4 |
168 D 50-13 | 16 | 8 | 25 | 50 | 13 | 16 | 12 | M4 |
208 D 50-13 | 20 | 8 | 25 | 50 | 13 | 16 | 12 | M4 |
208 D 60-13 | 20 | 8 | 25 | 60 | 13 | 16 | 12 | M4 |
2010 D 60-13 | 20 | 10 | 25 | 60 | 13 | 16 | 14 | M5 |
2510 D 70-16 | 25 | 10 | 32 | 70 | 16 | 20 | 15 | M5 |
2512 D 70-16 | 25 | 12,5 | 32 | 70 | 16 | 20 | 17,5 | M6 |
3212 D 80-16 | 32 | 12,5 | 32 | 80 | 16 | 20 | 17,5 | M6 |
3216 D 100-16 | 32 | 16 | 32 | 100 | 16 | 20 | 22 | M6 |
Brush holders with two clips
Style 1 Style 2
