The NYCWY 0.6-1 kV power cable manufactured by TKD kabel (TKD cable) is used in local networks, for use in distribution and industrial devices, for power plants. It is laid in indoor areas, subject to increased mechanical protection against contact voltage, and is also laid in cable ducts, in soil, outdoors and in water.
Technical specifications:
Number of conductive cores: up to 4; Core diameter: up to 300mm2;
Conductor: copper;
Structure: according to From CEOE 0295 category 1 or 2, corresponds to IEU 60228 category 1 or 2;
Insulation: PVX;
Marking of veins: according to CEOE 0293 – 308;
Twisting scheme: layered midwife;
Internal insulation: filler;
Common cable screen NYCWY 0,6/1 kV: wrapped with copper screw bands, concentric wire made of round copper wire;
External insulation: PVX;
The minimum bending radius is static: single-core wire - 15 x cable thickness; multi-core - 12 x cable thickness;
Static temperature: -40 C /+70 C;
Travel temperature: - 5 C /+ 50 S;
The maximum temperature on the conductor: +70 C - in operation; +160 - during a short circuit;
Shell properties: according to From CEOE 0472 part 804, type of tests In and IEU 60332 - 1, does not spread gorenje;
Standard: according to From CEOE 0271 and IEFrom 60502;
Norms: CEOE.
Environmental requirements:
The outer shell is resistant to UV radiation.
When laying the cable NYCWY 0,6/1 kV in dry rooms, end couplings are not required.
Organosilicon rubber is not used (in the manufacture).