TKD Kabel NYCY Power Cables

The NYCY 0.6-1 kV power cable manufactured by TKD kabel (TKD cable) is used in local networks, for use in distribution and industrial devices, and for power plants. The laying is carried out in the interior, with the condition of increased mechanical protection against contact voltage, and is also laid in cable ducts and in the soil, outdoors and in water.

Technical specifications:

Number of conductive cores: up to 61; Core diameter: up to 10mm2;

Conductor: copper;

Structure: according to From CEOE 0295 category 1, corresponds to IEU 60228 category 1;

Insulation Material: PVX;

Marking of veins: from one vein - black; from many veins - according to CEOE 0207 section 4;

Twisting method: layer-by-layer concentric winding;

Internal insulation: filler;

Common cable screen NYCY 0,6/1 kV: made of round copper wire, concentric wire wrapped with copper screw bands;

External insulation: PVX;

The minimum bending radius is static: single-core wire - 15 x cable thickness; stranded - 12 x cable thickness;

Static temperature: -40 C /+70 C;

Travel temperature: - 5 C /+ 50 S;

The maximum temperature on the conductor: +70 C - in operation; +160 - in case of short circuit;

Shell properties: according to From CEOE 0472 part 804, type of tests In and IEU 60332 - 1, does not spread gorenje;

Standard: according to From CEOE 0271 and IEFrom 60502;

Norms: CEOE.

 

Environmental requirements:

The outer shell is resistant to UV radiation.

When laying the cable NYCWY 0,6/1 kV in dry rooms, end couplings are not required.

Organosilicon rubber is not used (in the manufacture).