German companies EMOD ENGINES In addition to the production of general-purpose electric drives, he is engaged in the design and development of electric motors for lifting, elevator and crane equipment. The long-term experience corresponding in this direction allows the company to occupy leading positions in many European and other countries of the world. The specifics of the use of crane and lifting electric motors involve working with heavy loads in those industries and industries where heavy modes of operation are assumed, and sometimes in conditions of negative environmental impact, which is noteworthy for port and marine cranes, as well as in the metallurgical and chemical industries. Therefore, the constant operation of electric motors of this type is a real "strength test", where technical malfunctions and emergencies must be excluded. Increased reliability requirements are the main working conditions in this segment.
Most of the electric motors are manufactured by the company EMOD ENGINES, taking into account the specifics and place of application, they are additionally equipped with an electromagnetic brake of their own design. There are many examples when a high-speed anchor disc during operation demonstrated high braking accuracy during short deceleration. Regardless of the type of electric drive, by applying voltage, it is possible to control the brake and change its position. In turn, when using the electric motor at maximum capacity, it is recommended to turn on the engine with an inactive brake. Since the operation of large brake motors, the response time of the engine and the brake are significantly different. Starting the drive with the applied brake and a high permissible number of operations for a certain unit of time will gradually cause wear of the brake lining in the future. The presence of this fact will mean overheating of the winding, accompanied by turning off the motor due to the cyclical nature of high current starts.
Technical parameters of EMOD MOTOREN three-phase electric motors for elevator, lifting and crane equipment:
- Type of rotor: short-circuited;
- Dimensions: from 71 to 315 mm;
- Voltage: from 400 to 500 V;
- Rated power: from 0.07 to 75 kW;
- Rated speed: from 150 to 2930 rpm;
- Rated current: from 16 to 400 A;
- Frequency: from 50 to 60 Hz;
- Number of poles: from 2 to 36;
- Insulation class: F;
- Types of cooling: IC416, IC616;
- Protection class: IP23, IP 55.
You can specify the price, place an order and also buy three-phase electric motors EMOD MOTOREN, for elevator, lifting and crane equipment, by calling us on the phone: saluteh.
