Description
Features
Reviews
Main Features
| range | TeSys | |
|---|---|---|
| Product name | TeSys D Green | |
| the type of device or its accessories | Contactor | |
| short name of the device | LC1D | |
| contactor application | Electric motor control Active load |
|
| Application category | AC-1 AC-3 |
|
| description of the poles | 3P | |
| configuration of the main contacts | 3 N.O. | |
| [Ue] rated operating voltage | <= 690 V переменный ток 25...400 Hz для силовая цепь | |
| [Icw] rated short-term permissible current | 80 A (<= 60 °C) в <= 440 V AC-1 для силовая цепь 50 A (<= 60 °C) в <= 440 V AC-3 для силовая цепь |
|
| engine power, kW | 22 kW at 380...400 V AC 50 Hz AC-3 25 kW at 415 V AC 50 Hz AC-3 30 kW at 440 V AC 50 Hz AC-3 30 kW at 500 V AC 50 Hz AC-3 33 kW at 660...690 V AC 50 Hz AC-3 15 kW at 220...230 V AC 50 Hz AC-3 |
|
| engine power, hp | 3 hp at 115 V AC 60 Hz for 1 phase motors 7.5 hp at 230/240 V AC 60 Hz for 1 phase motors 15 hp at 200/208 V AC 60 Hz for 3 phases motors 15 hp at 230/240 V AC 60 Hz for 3 phases motors 40 hp at 460/480 V AC 60 Hz for 3 phases motors 40 hp at 575/600 V AC 60 Hz for 3 phases motors |
|
| control circuit voltage | 100...250 V DC 100...250 V lane Current 50/60 Hz |
|
| coil type | AC/DC electronic | |
| vspom. contacts available on each contactor | 1 N.O. + 1 N.Z. | |
| [Up] rated pulse withstand voltage | 6 kV in accordance with IEC 60947 | |
| overvoltage category | III | |
| [Ith] conditional thermal current in the open air | 80 A in <= 60 °C для силовая цепь 10 A in <= 60 °C для цепь сигнализации |
|
| Rated switching capacity of Irms | 900 A to 440 V for power circuit according to IEC 60947 140 A alternating current for alarm circuit according to IEC 60947-5-1 250 A direct current for alarm circuit according to IEC 60947-5-1 |
|
| rated breaking capacity | 900 A to 440 V for power circuit according to IEC 60947 | |
| [Icw] rated short-term sustained current | 100 A 1 s alarm circuit 120 A 500 ms alarm circuit 140 A 100 ms alarm circuit 400 A <= 40 °C 10 с силовая цепь 810 A <= 40 °C 1 с силовая цепь 84 A <= 40 °C 10 мин силовая цепь 208 A <= 40 °C 1 мин силовая цепь |
|
| the corresponding fuse rating | 100 A gG in <= 690 V координация тип 1 для силовая цепь 100 A gG in <= 690 V координация тип 2 для силовая цепь 10 A gG for alarm circuit according to IEC 60947-5-1 |
|
| average total resistance | 1.5mOhm V 50 Hz - Ith 80 A for power circuit | |
| [Ui] rated insulation voltage | 690 V for power circuit according to IEC 60947-4-1 690 V for alarm circuit according to IEC 60947-1 |
|
| electrical wear resistance | 1.8 Mcycles 42 A AC-3 at Ue <= 440 V 0.5 Mcycles 80 A AC-1 at Ue <= 440 V |
|
| power dissipated by one pole | 3.7W AC-3 9.6W AC-1 |
|
| protective cover | With | |
| mounting support | Panel mounting The rail |
|
| standards | EN/IEC 60947-4-1 UL 60947-4-1 CSA C22.2 No 60947-4-1 EN/IEC 60947-5-1 |
|
| certification | br>CSA CCC EAC KC LROS (Lloyds register of shipping) DNV-GL |
|
| accessions | Control circuit : screw clamp 2 cable(s) 1...2.5 mm2 - cable stiffness: flexible - with cable tip Power circuit : EverLink connectors with BTR screws 1 cable(s) 1...35 mm2 - cable stiffness: flexible - without cable tip Power circuit : EverLink connectors with BTR screws 1 cable(s) 1...35 mm2 - cable stiffness: flexible - with cable tip Power circuit : EverLink connectors with BTR 2 screws cable(s) 1...25 mm2 - cable stiffness: flexible - without cable tip Power circuit : EverLink connectors with BTR 2 screws cable(s) 1...25 mm2 - cable stiffness: flexible - with cable tip Control circuit : screw clamp 1 cable(s) 1...4 mm2 - cable stiffness: flexible - without cable tip Control circuit : screw clamp 2 cable(s) 1...4 mm2 - cable stiffness: flexible - without cable tip Control circuit : screw clamp 1 cable(s) 1...4 mm2 - cable stiffness: flexible - with cable tip Control circuit : screw clamp 1 cable(s) 1...4 mm2 - cable stiffness: rigid cable Control circuit : screw clamp 2 cable(s) 1...4 mm2 - cable stiffness: rigid cable Power circuit : EverLink connectors with BTR screws 1 cable(s) 1...35 mm2 - cable stiffness: rigid cable Power circuit : EverLink connectors with BTR screws 2 cable(s) 1...25 mm2 - cable stiffness: rigid cable |
|
| tightening torque | Control circuit : 1.7 N-m - screw clamp - flat with a screwdriver. Ø 6 mm Control circuit : 1.7 N-m - screw clamp - using a Philips No. 2 screwdriver Power circuit : 8 N-m - EverLink connectors with screws BTR - cable 25...35 mm2 hexagon 4 mm Power circuit : 5 Nm - EverLink connectors with BTR screws - 1...25 mm2 hex cable 4 mm |
|
| Response time | 55...65 ms enable 20...120 ms opening (date code >=17221) 20...80 ms opening (date code >=18011) |
|
| a safe level of reliability | B10d=1369863 cycles contactor with rated load according to EN/ISO 13849-1 B10d=20000000 cycles contactor with mechanical load according to EN/ISO 13849-1 |
|
| mechanical wear resistance | 6 million cycles | |
| Operating frequency | <= 3600 cyc/h at <= 60 °C |
Additional features
| the technology of using coils | Built-in bidirectional peak limiting | |
|---|---|---|
| voltage limits of the control circuit | <= 0.1 Uc drop-out at 60 °C 0.85...1.1 Uc operational at 60 °C |
|
| power consumption when triggered | 18 VA at 20 °C 50/60 Hz | |
| starting power, W | 14 W at 20 °C | |
| power consumption during holding, V·A | 1.8 VA at 20 °C 50/60 Hz | |
| power consumption during holding, W | 1.2 W at 20 °C | |
| heat transfer | 1.2 W at 50/60 Hz | |
| the type of vspom. contacts | Type mechanically coupled (1 N.O. + 1 N.Z.) in accordance with IEC 60947-5-1 Type duplicate contact (1 N.Z.) in accordance with IEC 60947-4-1 |
|
| alarm circuit frequency | 25...400 Hz | |
| minimum switching current | 5 mA for alarm circuit | |
| minimum switching voltage | 17 V for alarm circuit | |
| time without overlap | 1.5 ms when voltage is removed (between NC and NO contact) 1.5 ms when voltage is applied (between NC and NO contact) |
|
| insulation resistance | > 10 mOhm for alarm circuit |
Operating conditions
| degree of IP protection | IP20 front panel in accordance with IEC 60529 | |
|---|---|---|
| protective design | TH in accordance with IEC 60068-2-30 | |
| degree of contamination | 3 | |
| Ambient operating temperature | -25...60 °C | |
| ambient temperature during storage | -60...80 °C | |
| permissible air temperature around the device | -40...70 °C at Uc | |
| working height | 3000 m without temperature degradation | |
| Fire resistance | 850 °C in accordance with IEC 60695-2-1 | |
| Fire resistance | V1 in accordance with UL 94 | |
| mechanical resistance | Vibration contactor is open 2 g (nom.), 5...300 Hz Vibration contactor is closed 4 g (nom.), 5...300 Hz Shocks The contactor is open 10 gn for 11 ms Shocks The contactor is closed 15 g (nom.) for 11 ms |
|
| height | 122 mm | |
| width | 55 mm | |
| depth | 120 mm | |
| Product weight | 0.997 kg | |
| colour | Grey SE GREY 6 Green SE GREEN 2 |
Features
Brand
Schneider
No reviews yet — yours could be the first.
All reviews 0
Список отзывов пуст