Synchronous spindle electric motors Franz Kessler The SMS series were primarily created for use in lathes. At the same time, electric motors of this type are characterized by high power, compact design and large working life. It should also be noted that the motor spindles of this series have several types of fastening of working tools ranging from A4 to A15, and also include options such as: special clamps, holders of various diameters, as well as temperature sensors.
From the point of view of design reliability, spindle drives Franz Kessler SMS series are assembled from high-quality components (bearings, shaft, stator winding). It was also noted that before starting operation, each electric motor of the SMS series (if there is an appropriate tool) assumes prompt setup and preparation for further use, and the minimum noise level during daily operation can also be attributed to the advantages of the drives of the SMS series.
You can buy motor spindles Franz Kessler SMS series, in our company, on the issue of selection, we ask you to contact our engineers by phone saluteh or by e-mail saluteh
Technical parameters of Franz Kessler SMS series spindle motors for use in lathes:
- Type of electric motor: synchronous;
- Shaft diameter: from 100 to 500 mm;
- Power: from 17.5 to 102 kW;
- Speed: from 1800 to 8000 rpm;
- The torque: from 38 to 1800 Nm;
- Type of cooling: liquid;
- Type of bearing lubrication: oil;
- Types of tool mounting: A4, A6, A8, A11, A15;
- Weight: from 105 to 785 kg.
