Series of axial gearboxes g500-H from Schilke it has cylindrical gears, two- and three-stage design. This line is characterized by high efficiency in operation (more than 94%), low backlash and a close step of speed adjustment. The gearbox design is capable of withstanding high radial loads, standardized flanges and shafts are installed for easy integration.
Built-in three-phase AC motor with power range from 0.06 to 55 kW, working with an inverter, energy efficiency classes IE1, IE2, IE3. It is focused on performing a wide range of tasks. Compact body design.
Technical characteristics of Lenze g500-H cylindrical gear motors
- Rated torque: 45 - 14000 Nm;
- Gear ratio: 3 - 370;
- Number of steps: 2, 3;
- Maximum speed: up to 4000 rpm;
- Degree of protection of the housing (motor): IP54, IP55, IP65;
- Degree of protection: forced blowing;
- Operating temperature range: -20 .. °40 C.
Overall standard sizes of Lenze g500-H gear motors
Type of gearbox | Moment, Nm | Ratio reductions | Solid shaft, mm | Flange, mm |
g500-H45 | 45 | 3 - 60 | 14 x 28 20 x 40 | 120 140 160 |
g500-H100 | 100 | 3 - 60 | 20 x 40 | 120 140 160 |
g500-H140 | 140 | 3 - 75 | 25 x 50 | 120 140 160 |
g500-H210 | 210 | 3 - 290 | 25 x 50 | 120 140 160 200 |
g500-H320 | 320 | 3 - 320 | 30 x 60 | 160 200 |
g500-H450 | 450 | 3 - 370 | 30 x 60 35 x 70 | 160 200 250 |
g500-H600 | 600 | 3 - 250 | 35 x 70 40 x 80 | 200 250 |
g500-H850 | 850 | 3 - 230 | 40 x 80 | 250 300 |
g500-H1500 | 1500 | 4 - 310 | 50 x 100 | 250 300 350 |
g500-H3000 | 3000 | 4 - 280 | 60 x 120 | 300 350 450 |
g500-H5000 | 5000 | 5 - 370 | 70 x 140 | 350 450 |
g500-H8000 | 8000 | 4 - 330 | 90 x 170 | 450 550 |
g500-H14000 | 14000 | 5 - 330 | 110 x 210 | 450 550 |
You can buy Lenze g500-H series cylindrical gear motors, find out the price and more information about the product by contacting our specialists.
