LDO LXV416.99.20W01 Process Sensor
The new generation of LDO is even simpler, more reliable and more economical
An immersion or flow probe with an optical luminescence measurement method. No calibration and no drift. 5 years long-term warranty.
There are no changes in the electrolyte or membrane due to the optical measurement method. The new LDO sensor provides minimal maintenance. The luminescence method means that the measurement is not affected by any interference.
Many years of practical experience have shown that this method completely overcomes the disadvantages of traditional electrochemical methods of measuring O2.
PROGNOSYS guarantees the accuracy of your device readings. PROGNOSYS will monitor, provide reliable measurement values of the instrument and determine when upcoming maintenance tasks should be completed on an easy-to-read color display.
Extremely reliable - 5 years long-term warranty on the probe
An optimized temperature sensor and a new three-dimensional factory calibration make O2 measurement even more accurate
No changes to the electrolyte or membrane are required.
Remote functions for easy and convenient data transfer via the Internet and SMS
Constantly provides information about the current status of the sensor through the Prognosys early warning system
Specifications
- Material: Sensor housing: CPVC, Polyurethane, Viton, Noryl, Stainless steel 316 1.4404 (AISI 316L)
- Sensor Cover: Acrylic
- Sensor cable: 10 m (33 ft) with connector for quick connection
- Weight: 1.0kg, probe only
- Response Time: T95 <60 с
- Response Time: T90 <40 с
- Overall dimensions (Ø x D): 48.25 mm x 254 mm
- Warranty: Sensor housing: 3 years old, Sensor cover: 2 years
- in standard applications
- In combination with TSELTW01: 5 years
- Diameter: 48.25mm
- Pressure range: Max. 3.5 bar (50 psi)
- Measuring range: 0.01 - 20.00 mg/L
- 0 - 200% air saturation
- Operating temperature range: 0 - 50 °C
- Length: 254 mm
- Cable Length: 10m (33ft)
- Interference (interfering substances): There is no interference from the following factors: H2S, pH, K+, Na+, Mg2 +, Ca2+, NH4+, Al3+, Pb2+, Cd2+, Zn2+, Cr (total), Fe2+, Fe3+, Mn2+, Cu2+, Ni2+, Co2 + CN-, NO3-, SO42-, S2-, PO43-, Cl-, anion-active surfactants, crude oil, Cl2 <4 ч / млн
- Protection class: IP68
- Housing material (sensor): Stainless steel
- Repeatability: ± 0.1 mg/l (millionths)
- Measurement error: Temperature: ± 0.2 ° C (± 0.4 ° F)
- Sample flow: 1" NPT male thread
- Transmission distance: 1000 m (3280 ft) maximum when used with a junction box
- 100 m (328 ft) maximum when used with an extension cable
- Consumption: not required
- Accuracy, Error: ± 0.2 mg /l>5 ppm
- ± 0.05 mg /l below 1 h /million
- ± 0.1 ppm below 5 ppm
- Storage conditions: -20 °C - 70 °C
- Sensitivity: ± 5% of the duration