DC motors of the DMP series were produced until 2009, and are currently discontinued. DC electric motors DMP were installed on cutters, extruders, funiculars, printing machines, metalworking machines, test benches, conveyors, mixers, centrifuges...
Regarding the selection of analogues instead of DC motors of the DMP series, please contact our engineers by phone saluteh or email saluteh.
Parameters of DC motors of the DMP series
- Rated power: up to 200 kW;
- Armature voltage: 200 - 600 V;
- Nominal torque: up to 1000 Nm;
- Overall height: 112 -180 mm;
- Degree of protection: IP23, IP44, IP54, IP55;
- Cooling method: IC01, IC06, IC17, IC37, IC410, IC416, IC666, IC86W;
- Insulation class: F /H;
- Standard sizes: DMP112-2MA, DMP112-2LA, DMP 112-4M, DMP 112-4L, DMP 132-2M, DMP 132-4M, DMP 132-4L, DMP 132-4LB, DMP 160-4S, DMP 160-4S, DMP 160-4M, DMP 160-4M, DMP 160-4M, DMP 160- 4L, DMP160-4LO, DMP160-4LB, DMP 180-4A, DMP 180-4B, DMP 180-4C, DMP 180-4D, DMP 180-4E, DMP 180-4F;
- Installable options: feedback sensors (tachogenerators, encoders, resolvers), temperature sensors (PTO, PTC, PT100, KTY84), vibration measurement sensors, brush wear monitoring sensors, bearing lubrication replenishment, reinforced bearings, terminal box adaptation, adaptation of the height of the shaft axis of the electric motor using adapter frames, etc.
Technical characteristics of DC motors of the DMP series
type of motor | Pn, kW | Nn, rpm | Tn, Nm | Ia, And | Pexc, W |
DMP112-2MA | 2-14,2 | 645-4590 | 30 | 12-41 | 420 |
DMP112-2LA | 3,0-15,5 | 655-3335 | 45 | 12-38 | 500 |
DMP112-4M | 4,6-21,4 | 920-4000 | 50 | 21-70 | 625 |
DMP112-4L | 7,9-32,4 | 1070-4755 | 70 | 25-100 | 740 |
DMP132-2M | 4,0-25,3 | 605-3640 | 67 | 16-72 | 550 |
DMP132-4S | 5,9-39,9 | 555-3945 | 110 | 27-100 | 750 |
DMP132-4M | 7,4-46,6 | 515-3645 | 140 | 35-125 | 830 |
DMP132-4L | 7,7-53,2 | 495-3980 | 150 | 38,5-114 | 1000 |
DMP132-4LB | 10,3-56,9 | 415-2670 | 240 | 43-123 | 1350 |
DMP160-4S | 12,4-64,2 | 650-3335 | 185 | 41-166 | 1050 |
DMP160-4SO | 14,8-73,7 | 680-3360 | 215 | 47-189 | 1240 |
DMP160-4M | 15,4-87 | 620-3460 | 240 | 50-200 | 1250 |
DMP160-4MO | 18,1-94,6 | 640-3480 | 270 | 57-210 | 1500 |
DMP160-4L | 19,6-102 | 605-3330 | 310 | 63-234 | 1400 |
DMP160-4LO | 23,2-110 | 620-3325 | 350 | 72-250 | 1400 |
DMP160-4LB | 21,8-125 | 410-2725 | 500 | 72-250 | 2000 |
DMP180-4A | 27-139 | 650-4400 | 400 | 83-368 | 1520 |
DMP180-4B | 27-168 | 540-3950 | 470 | 83-450 | 1670 |
DMP180-4C | 31-198 | 490-3640 | 600 | 98-450 | 1900 |
DMP180-4D | 33-225 | 450-3450 | 700 | 102-450 | 2240 |
DMP180-4E | 49-214 | 570-2760 | 800 | 144-450 | 2400 |
DMP180-4F | 66-237 | 610-2580 | 900-1000 | 189-474 | 2650 |
Pn is the rated power, n is the rotation speed, Tn is the rated torque, Ua is the armature voltage, Ia is the armature current, Uexc is the excitation voltage, Iexc is the excitation current.