Over the past five years, our engineers have been collecting information about typical malfunctions encountered during the operation of meat processing equipment. The analysis showed that the simplicity and high reliability of the mechanical design of the cutters, combined with the timely performance of routine maintenance (replacement of knives, bearings, belts, cuffs, etc.) ensure the durability of the equipment.
The situation is completely different with electrical equipment. Electric motors, DC and AC electric drives operate in peak and shock load modes: during the development of frozen block raw materials, during the production of products with a regulated knife processing speed of 4000 rpm. An important factor in the failure of engines, drives, and control panels is the high humidity of the environment, which contributes to the formation of condensate inside electrical installations, only some enterprises provide centralized cooling of equipment and removal of control cabinets outside the production area.
Today, our company, together with T-T Electric, is ready to offer you DC and AC electric motors that are specially designed for use as part of cutters. When designing T-T Electric electric motors, the “sore spots” characteristic of Baumuller and Faurndau electric motors used by many European manufacturers were eliminated in their design. Flexibility in production allows us to manufacture electric motors that fully correspond to native electric motors both in terms of electrical characteristics and overall dimensions – you get a more reliable 100% analog.
Commissioning works at the Russian Grade NPP LLC (18Mb video, 6Mb video).
Since 2004, our company, together with T-T Electric, has supplied DC and AC electric motors for cutters from such companies as CFS, Laska, Kremer Grebe, Kilia, Seydelmann, K+G Wetter, Metalbud Nowicki Taifun, Dadaux & Co, Mado, PSS, Ari Makina, GEA Cutters,Tipper Tie Alpina. When replacing electric motors, our engineering service will perform commissioning and optimization of the operation of the electric drive.
Areas of cooperation with meat processing enterprises:
- DC electric motors, asynchronous AC electric motors in place of Baumuller, ABB, Faurndau, Lenze, Siemens, Leroy Somer motors;
- DC electric drives, frequency converters ABB, BBC, Siemens, Baumuller, Lenze, Control Techniques;
- electrographite brushes for DC motors;
- commissioning and repair of cutters;
- repair of electric motors, electric drives of direct and alternating current.
Most of the equipment is maintained in stock and is available to customers within 24 hours.
T-T Electric motors are supported in our warehouse, suitable for replacing the following Baumuller DC motors:
1. Baumuller GNF 180MN 173 kW DC electric motor, 400V 465A, 3100 rpm;
2. Baumuller GNF 200SNA direct current electric motor 182 kW, 420V, 463A, 2950-3800 rpm;
3. Baumuller GNF 160SN DC electric motor 95KW, 400V, 195 A, 3070-3600 rpm;
4. Baumuller GNF 200SN 202KW DC motor, 420V, 515A, 2950-3800 rpm;
5. Baumuller GNF 180SN direct current electric motor 138KW, 400V, 373A, field of excitation 320V/6.5A, 2950ob/min;
6. DC electric motor Faurndau EF 180XV 140/170kW, 440V, 340/415A, excitation field 360V/3.75A, 3320 rpm;
7. Baumuller GNF 180MNA DC motor 142KW, 420V, 364A, excitation parameters 310-265V/7.0-6.0A, 2720-3000ob/min;
8. Asynchronous electric motor Baumuller DA 180 L23A30-5,200 kW, 3 x 400V, 3000 rpm;
9. Baumuller GNF 160LN 136KW DC motor, 420V, excitation 310V/2.1A, 3160-3300 rpm.
Regarding the replacement of electric motors and electric drives, the availability of electrical equipment in stock for cutters CFS, Laska, Kremer Grebe, Kilia, Seydelmann, K+G Wetter, Metalbud Nowicki Taifun, Dadaux & Co, Mado, PSS, Ari Makina, Tipper Tie Alpina, please contact us by phone.: saluteh or email saluteh.