Company Marelli Motori has developed a wide range of models of electric power generators of various designs and a wide range of power values up to 12,500 kVA covering low, medium and high levels.
Generator design MJHR It is enclosed in a rigid frame made of durable steel and additional stiffeners for even greater strength. Cast iron body (grey and with spherical graphite), forged shaft made of laminated carbon steel, diameter from 290 mm and above, design on request. The stator/rotor windings are coated with unsaturated polyester and polyamide resins, insulation class – H (synthetic enamel). Protection against radio interference of class B (EN 55011). Installation is horizontal, other variations on request.
The heat exchanger is installed in the upper part of the generator, uses fresh or seawater, is equipped with a leak sensor, operating pressure is 6 bar (test 10 bar), flow rate is 18 cubic meters /hour. The structure has a double CuNi 90/10 pipe, the body is made up of copper plates.
It is used for operation in the main mode on Variable power (PRP).
Technical characteristics of the MJHR series of sealed-shell water/air cooled electric current generators (TEWAC).
- Rated power for 4-pole generators: up to 10000 kVA;
- Rated power for 6-pole generators: up to 12,500 kVA;
- Rated power for 8-pole generators: up to 12,500 kVA;
- Rated power for 10-pole generators: up to 12,500 kVA;
- Rated power for 12-pole generators: up to 10000 kVA;
- Rated operating voltage: up to 15,000 V;
- Industrial frequency: 50 Hz (European standard)/60 Hz (North American standard);
- Overall height: 400 – 1250 mm;
- Mounting design: IM 1001, IM 1101 in accordance with IEC 60034-7;
- The degree of protection of the case: IP44, optional up to IP56;
- Degree of protection: IC 81W;
- Insulation class: H;
- Temperature class: H/F;
Standard sizes:
